• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Rear Window Defroster Help

  • Thread starter Thread starter WldstrawbryLX
  • Start date Start date Dec 29, 2006
W

WldstrawbryLX

New Member
Mar 21, 2004
35
0
0
Everett,WA
Dec 29, 2006
#1
  • Dec 29, 2006
  • #1
So for I've checked all fuses and relays associated with defroster...that I've found. When I push the button on the dash, the little light comes on....I here a click, but the rear window doesn't defrost. Is there another relay somewhere that Im missing?? (AND) Should there be voltage present at the leads that attach to the window itself?? TIA.
 

Saleen0679

10 Year Member
Apr 14, 2005
876
24
49
Yakima, WA
Dec 29, 2006
#2
  • Dec 29, 2006
  • #2
If the light comes on then you should have power going through the relay to the grid. You should also have around 12v across the grid.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Dec 29, 2006
#3
  • Dec 29, 2006
  • #3
Saleen is right-on. Also look for a broken line in the back window. They used to sell conductive paint to repair the lines (used in Alaska, where the defroster was real necessary) but I'm not sure if they still sell the stuff.

Good luck.
 

89streetbeast

New Member
Dec 4, 2006
365
1
0
horton,ks
Dec 29, 2006
#4
  • Dec 29, 2006
  • #4
HISSIN50 said:
Also look for a broken line in the back window.QUOTE]



yup. defrost dont work on the 89 either, fair weather car only
Click to expand...
 
W

WldstrawbryLX

New Member
Mar 21, 2004
35
0
0
Everett,WA
Dec 30, 2006
#5
  • Dec 30, 2006
  • #5
Cool. Thanks guys. I'll have to take a closer look at the grid to check for any open lines.
 

MahFiVeOh

Founding Member
Apr 26, 2002
531
9
49
Ontario, Canada
Dec 30, 2006
#6
  • Dec 30, 2006
  • #6
Is the rear window tinted? If it is theres a chance one of the lines have been "cut" druing the tint install.When i had my windows tinted the guy fooked up my rear defroster.It was a pain to find the bad spot but after a lil conductive paint it works fine now.Good luck.
 
P

praugue

New Member
Sep 18, 2007
26
0
0
Sep 18, 2007
#7
  • Sep 18, 2007
  • #7
First post. Just wanted to ask about rear-window defroster repair.

I've got an 89 LX hatchback and the defroster is missing a couple of "lines" on the grid.

Any good source or suggestions as to how to repair this? I can solder, etc. and have multimeters and tools.

Thanks!
 

glowstang93

20+ Year Stangneter
Feb 9, 2003
853
8
39
Illinois
Sep 18, 2007
#8
  • Sep 18, 2007
  • #8
http://autorepair.about.com/cs/doityourself/a/aa112302a.htm


and


http://www.frostfighter.com/ff_pdt_2100.htm


I found these on google: defroster grid repair.
 
P

praugue

New Member
Sep 18, 2007
26
0
0
Sep 18, 2007
#9
  • Sep 18, 2007
  • #9
Thanks for the links. It's pretty much what I suspected, but I like the info.
 
M

Mike85000

New Member
Feb 22, 2007
65
0
0
Oct 4, 2007
#10
  • Oct 4, 2007
  • #10
Hey,

I have the same problem with my car, only 2 strips work. Teh rear window has tint on it. Is it possible to use the conductive paint without removing the tint? I don't really want to have to pull off the tint, but i can't see ***** out the back in the mornings.
 
P

praugue

New Member
Sep 18, 2007
26
0
0
Oct 5, 2007
#11
  • Oct 5, 2007
  • #11
As far as I know, the tint and the defroster are both on the inside. Maybe small repairs to the grid won't damage the tint.
 

glowstang93

20+ Year Stangneter
Feb 9, 2003
853
8
39
Illinois
Oct 5, 2007
#12
  • Oct 5, 2007
  • #12
Sorry but the grids are under the tint. To try to do any repairs, the tint will have to come off. I remember my installer saying something about a special process using a garbage bag and heat to remove the tint since there is a rear defroster. Don't quote me on how its done, but it is different than just scraping it off. Scraping it off will take off your grid too, which is not what you are wanting to do at all.
 
P

praugue

New Member
Sep 18, 2007
26
0
0
Oct 20, 2007
#13
  • Oct 20, 2007
  • #13
I was easily able to find the gaps of my grid with a multimeter. I then set my meter to read current and jumped across the gaps. This confirms that the rest of the grid line is good. *FYI - there is about 1 Amp of current going through each grid line. * So, with about 14 grid lines you are drawing 14 Amps to run the defroster.

Now - how did any of you clean off the insulation covering the grid lines? I tried a few things, but nothing with great results.
 
P

praugue

New Member
Sep 18, 2007
26
0
0
Oct 21, 2007
#14
  • Oct 21, 2007
  • #14
Further info on removing the insulation covering the grid lines:

I've found repair kits that seem to have light grit sandpaper included, and other kits that make no mentipon of removing the insulation.

I don't know which will work better, but I can't see how a kit would work if the insulation isn't removed.
 
You must log in or register to reply here.

Similar threads

C
Electrical Fuel Gauge...Help! What did I do or Didn't Do?
  • ChickenDeluxe
  • Sep 3, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
246
Fox 5.0 Mustang Tech Sep 3, 2026
ChickenDeluxe
C
M
Need help please
  • Mikey62666
  • Oct 12, 2026
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
1
Views
132
2005 - 2014 S-197 Mustang -General/Talk- Oct 14, 2026
gkomo
D
Mustang not starting
  • Dawry Ramos
  • Sep 12, 2026
  • 2015 - 2023 Specific Tech
Replies
10
Views
415
2015 - 2023 Specific Tech Oct 3, 2026
Dawry Ramos
D
S
Help with window and possible engine
  • StefRena22
  • Jun 12, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2025
Willybill32
G
Help! Radio, door chime fuse keeps blowing.
  • goofyfoot53
  • Sep 9, 2025
  • 2.3L (N/A & Turbo) Tech
Replies
1
Views
411
2.3L (N/A & Turbo) Tech Sep 9, 2025
91AOD5.0LX
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?