Redline Tuning Quicklift Kit

I called 50resto and they told me they were on backorder. They told me they had not received any from Redline yet. So I didn't order them from them.

I emailed Redline and they told me that they had them in stock. So I ordered the Quicklift Plus Kit. It has the 2 yr warranty on all parts with all black hardware. I thought the zinc plated brackets might stick out like a sore thumb. I want it to look cool, like stock but better and not really noticable except for the Mustang fanatic.

Will post some pics, hopefully in about a week. I don't have a rivet gun, so I'm going to have my favorite body shop pop them in.
 
The hood does go up higher with the kit. There were a few little kinks, but install was not too bad. One of the rods seems to be in a little bind, but it looks like it is mainly body movement at the bottom mount. Only time will tell how the struts work and last. But all in all, I am happy with the install. Here are some pics. I took them inside my garage and its winter time so the pony is not super clean at this time.:( I did the install at home with the help of my wife using just a cheap $10 rivet gun. It took me about 3 hrs, but if I had to do it again, it would take about 1 hr.

View attachment 492925

View attachment 492927

View attachment 492929
 
I have installed a set before on a friends car. Very nice!:nice:

581377_142_full.jpg


These I made myself.

581377_113_full.jpg
 
I have noticed some flex of one of the shocks when I start to close the hood. i figure its probably normal since nothing is going to be perfectly square no matter how many times i measured. Did you notice any of this on your friends? Or did he have a stock metal hood? I have sent Redline an email asking them about this and should have a response today I hope. I checked my hatch shocks and if you look real close there is a little flex in those too and they are bigger.:flag:
 
Didn't really notice this too much on either. His car has the stock hood and mine had a fiberglass hood. I went with lighter shocks with mine so it wouldn't stress the mount bolts too much when I closed it.
 
I talked to redline and they said that it sounded like I installed them correctly and if I have any problems they would replace a shock if needed. They did say that sometimes the shocks have to be taken off and cycled some. He also pointed out that there is not buch overlap in the rod and the body of the shock. I really appreciate their quick response and understanding of their product.