Has anyone tried the Redline Tuning hood struts? I am thinking about buying the $59.95 quicklift kit. I don't see the need to spend more for the stainless steel. I will probably order them from www.50resto.com
Any opinions or thoughts would be appreciated. Thanks
View attachment 493489
Any opinions or thoughts would be appreciated. Thanks
View attachment 493489
2002BLGT
Well-Known Member
tunedin302
I AM the law!!!
I called 50resto and they told me they were on backorder. They told me they had not received any from Redline yet. So I didn't order them from them.
I emailed Redline and they told me that they had them in stock. So I ordered the Quicklift Plus Kit. It has the 2 yr warranty on all parts with all black hardware. I thought the zinc plated brackets might stick out like a sore thumb. I want it to look cool, like stock but better and not really noticable except for the Mustang fanatic.
Will post some pics, hopefully in about a week. I don't have a rivet gun, so I'm going to have my favorite body shop pop them in.
I emailed Redline and they told me that they had them in stock. So I ordered the Quicklift Plus Kit. It has the 2 yr warranty on all parts with all black hardware. I thought the zinc plated brackets might stick out like a sore thumb. I want it to look cool, like stock but better and not really noticable except for the Mustang fanatic.
Will post some pics, hopefully in about a week. I don't have a rivet gun, so I'm going to have my favorite body shop pop them in.
The hood does go up higher with the kit. There were a few little kinks, but install was not too bad. One of the rods seems to be in a little bind, but it looks like it is mainly body movement at the bottom mount. Only time will tell how the struts work and last. But all in all, I am happy with the install. Here are some pics. I took them inside my garage and its winter time so the pony is not super clean at this time. I did the install at home with the help of my wife using just a cheap $10 rivet gun. It took me about 3 hrs, but if I had to do it again, it would take about 1 hr.
View attachment 492925
View attachment 492927
View attachment 492929
View attachment 492925
View attachment 492927
View attachment 492929
Curse
Member
I do agree with the height thing. They could have used a shorter stroke strut, but I can see how useful that height would be if your wrenching on the motor.
04sleeper
Founding Member
I have noticed some flex of one of the shocks when I start to close the hood. i figure its probably normal since nothing is going to be perfectly square no matter how many times i measured. Did you notice any of this on your friends? Or did he have a stock metal hood? I have sent Redline an email asking them about this and should have a response today I hope. I checked my hatch shocks and if you look real close there is a little flex in those too and they are bigger.
04sleeper
Founding Member
Didn't really notice this too much on either. His car has the stock hood and mine had a fiberglass hood. I went with lighter shocks with mine so it wouldn't stress the mount bolts too much when I closed it.
I talked to redline and they said that it sounded like I installed them correctly and if I have any problems they would replace a shock if needed. They did say that sometimes the shocks have to be taken off and cycled some. He also pointed out that there is not buch overlap in the rod and the body of the shock. I really appreciate their quick response and understanding of their product.
04sleeper
Founding Member
Yes, you are supposed to cycle them a couple of times before installing them.
I'm glad to see they have good customer support.
Thanks for the info.
I'm glad to see they have good customer support.
Thanks for the info.
Similar threads
- Replies
- 19
- Views
- 1K
- Replies
- 6
- Views
- 317
- Replies
- 13
- Views
- 2K
- Replies
- 23
- Views
- 1K