So today I noticed a leak coming out of my thermostat housing (and i just replaced the thermostat yesterday, so I took it back apart thinking I messed up the gasket. Then I found the nipple going in the housing to be almost completely rusted out. It's kind of hard to see by the phone pic, but it was toasted. I cant believe I didnt notice it yesterday.
So I called around to some local parts stores and nobody had anything. So I rode my mountain bike up to Napa to see what they had, and found one of those nipples that thread into an edelbrock manifold, and rednecked it. I cut it off, and then made the taper with a grinder, and then pressed it in with a vise. Can you believe it, this actually worked! I'm wondering whether I should leave it that way or go looking for the real part. The chrome added .04 horsepower!
So I called around to some local parts stores and nobody had anything. So I rode my mountain bike up to Napa to see what they had, and found one of those nipples that thread into an edelbrock manifold, and rednecked it. I cut it off, and then made the taper with a grinder, and then pressed it in with a vise. Can you believe it, this actually worked! I'm wondering whether I should leave it that way or go looking for the real part. The chrome added .04 horsepower!