• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Removing AC Condenser??

  • Thread starter Thread starter 87lc2
  • Start date Start date Dec 28, 2005
8

87lc2

Member
Oct 16, 2005
214
0
17
Dec 28, 2005
#1
  • Dec 28, 2005
  • #1
Got in a front end collision and the condenser was smashed. im looking to just remove it for the time being and replace it later. however, there are no obvious connections on the line that can just be taken off with a wrench. how do i take it out without damaging the lines so i can put another one on later?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Dec 28, 2005
#2
  • Dec 28, 2005
  • #2
There are two slip connects, 1/2" & 5/8" below the alternator next to the inner fender. They are the same kind and size connectors used on the fuel lines.

The removal tools look like little plastic top hats, you will need the 1/2" & 5/8" ones. Look in the A/C repair section at your local auto parts store to find them. The hat shaped section goes on facing the large part of the coupling. Then you press hard on the brim until it forces the sleeve into the coupling and releases the spring. You may need someone to pull on the line while you press on the coupling. Put some motor oil on them when you put the line back together.
 

PuterAmI

Member
Mar 29, 2003
513
0
16
Madison, Alabama
Dec 28, 2005
#3
  • Dec 28, 2005
  • #3
More tools...

jrichker said:
The removal tools look like little plastic top hats, you will need the 1/2" & 5/8" ones. Look in the A/C repair section at your local auto parts store to find them.
Click to expand...

These Fuel Line Disconnect tools also work very well for the springlock connectors.

http://www.partsamerica.com/ProductDetail.aspx?categorycode=3412&mfrcode=APO&mfrpartnumber=T70046
 
8

87'GTstang

New Member
Feb 16, 2004
1,025
0
0
Dec 28, 2005
#4
  • Dec 28, 2005
  • #4
First thing you need to do is have the system evacuated of the refrigerant. I would highly recommend a professional with the right equipment do it unless you like buying the rare and expensive R12 (unless you decide to convert in the process). Keep in mind that whenever you open up the air conditioning system, you must replace the accumulator because the dessicant in the unit will become void of its purpose and you will have much worse problems later.
 
You must log in or register to reply here.

Similar threads

P
I need definitive heater valve and AC expansion valve answers
  • PurAU
  • Sep 26, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
252
1965 - 1973 Classic Mustangs -General/Talk- Oct 1, 2026
GypsyR
G
Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
718
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
R
Engine Evap and charcoal cannister leak
  • ryan1994stang
  • Mar 14, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
660
Fox 5.0 Mustang Tech Mar 18, 2026
Mcmahst
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
520
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
747
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?