Removing/Installing Fuel Line

G

geordie

Founding Member

May 10, 2002

576

2

19

Dec 27, 2008

#1

• Dec 27, 2008

• #1

Any tips for removing / installing a new fuel line (hard) in a '65 Coupe.
I've got all the clips removed and the line unhooked from the drivers inner fender. I've also disconnected it from the fuel tank. I can't work out how to wiggle out the old line out. I'm doing this without a lift. I could cut the old one out but then how do I wiggle the new one in..............
Thanks in advance guys.
Happy New Year to all Stangnetters

 

l1k2gadd

New Member

Oct 27, 2007

53

0

0

Summerfield, Florida

Dec 27, 2008

#2

• Dec 27, 2008

• #2

I can't really help you because the only fuel lines I have removed from cars are from cars that were completely cannibalized (back in the 80s). Most of them were 1967s and 1968s too.

 

coolblue65

Founding Member

Jul 26, 1999

1,224

2

39

Algonquin, IL

Dec 27, 2008

#3

• Dec 27, 2008

• #3

Support the car by the frame so that the rear suspension hangs down all the way. Then after that, its just a matter of playing with it till you get the old one out and the new one it.

 

G

geordie

Founding Member

May 10, 2002

576

2

19

Dec 29, 2008

#4

• Dec 29, 2008

• #4

The main problem that I have is that the PO installed a Ford 9 inch rear end and just in front of the gas tank, running from one side of the car to the other is a steel brace. The brace is intended to reinforce the chassis where the shocks are connected to it. The fuel line passes under the brace on the passenger side and I can't see how to remove it. Is this brace stock . I'll try and get a photo soon.

 

6

67rcks

Member

Feb 20, 2008

373

0

17

Dec 30, 2008

#5

• Dec 30, 2008

• #5

I don't know about 65, but in 67 the instalation is straightforward, just bend it a little, in worst case remove shock, or cut the line in half and install there a generic fuel filter if you really don't have patience.

Working under a car is a mess. I have similar experience (installing an custom-made exhaust system). Now I know why flowmaster can still sell at their prices.

 

G

geordie

Founding Member

May 10, 2002

576

2

19

Dec 31, 2008

#6

• Dec 31, 2008

• #6

Attached is a photo of the brace I was talking about. The fuel line goes under the brace.

 

Attachments

• Stangnet 1.webp

  23.3 KB · Views: 238

T

thekid760

New Member

Sep 10, 2006

114

0

0

Jan 1, 2009

#7

• Jan 1, 2009

• #7

Based on that picture, It appears as though you can unbolt the brace and pull it down to create enough room to pull the line out. But I haven't looked at mine yet so idk

I will be doing this down the road so Keep us informed please.