Removing Rear Interior panels on GT for 1/4 window install

its only a bunch of screws and the little trim piece at the top of the hatch and above the door

here's a tip i found after i paid $25 for a set of star bits to take the seatbelt off a good set of vicegrips works just as good ..

Here are a couple tips since I pulled my 1/4 windows this fall and it's still fresh in my mind:
1. I pulled the backseat (top and bottom) and I'm glad I did. It made dealing with that big ol' piece of plastic a lot easier.
2. If you are just swapping windows, don't bother removing the seat belt. There's enough slack that you can pull it back and get to everything with the seat belt still in place. I broke two T-50 torx bits trying to get my seat belt bolts off. that was after soaking them in penetrant.
3. If I remember right, there are 9 bolts holding the window on. Some are hard to see if you're not looking for them.
4. You'll need butyl sealing tape to put the new one on (hopefully that was an obvious statement).

Good luck.