• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

removing the center console!!

  • Thread starter Thread starter Jzava50
  • Start date Start date Jul 13, 2007

Jzava50

New Member
Jun 27, 2007
15
0
0
Syracuse ,ny
Jul 13, 2007
#1
  • Jul 13, 2007
  • #1
does anyone have a diagram or pics on how to remove the center consloe??? I am trying to install my tri-x shifter and cant get to the front to bolts without cutting.. im trying to do it with out cutting any thing im not supposed to
 

trbkrb

Founding Member
Jun 4, 2001
1,976
4
39
Houston, TX
Jul 13, 2007
#2
  • Jul 13, 2007
  • #2
Remove the oval plugs on the rear sides of the console to expose the armrest bolts (4). Remove the bolts and the armrest. The rear console tray screws are now exposed. Remove them. Remove the snap in trim and shifter boot and the front console tray screws. Remove the tray. Remove the trim under the steering column to expose the two front console screws and remove them. Open the glove box all the way and remove the two console screws. You might need to remove the radio also. Then the console base should be free to remove. You might have to disconnect the AC controls and also the 4 screws that hold the console to the dash are usually VERY tight if they have never been removed.

Good luck!
 

nicks95stang

New Member
Dec 7, 2004
5
0
0
Southwestern Indiana
Jul 14, 2007
#3
  • Jul 14, 2007
  • #3
Ive never removed a console to put in a shifter...and ive put in quite few shifters.
 

Jzava50

New Member
Jun 27, 2007
15
0
0
Syracuse ,ny
Jul 14, 2007
#4
  • Jul 14, 2007
  • #4
how can you get around the front two bolts ...ive been tryin for 4 hours?
 
B

bentley429

Banned
Nov 25, 2004
528
3
0
Connecticut
Jul 14, 2007
#5
  • Jul 14, 2007
  • #5
Is this a tremec or a T5? I can see why a tremec would be a pain but not a t5...
 
You must log in or register to reply here.

Similar threads

K
Resolved Weird sound coming from a freshly rebuilt 5.0L
  • karhoot
  • Jun 24, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
402
Fox 5.0 Mustang Tech Jun 27, 2026
Mac131
Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
733
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
A
A/F ratio gauge install questions.
  • AngryH58
  • Sep 24, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
253
1996 - 2004 SN95 Mustang -General/Talk- Oct 22, 2026
Noobz347
Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
243
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
G
Engine Pushrod Length Question
  • germain101
  • Sep 22, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
753
Fox 5.0 Mustang Tech Sep 25, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?