• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Replacing Ac Pump - Do I Need To Add Pag Oil To My Pump?

  • Thread starter Thread starter Rusty67
  • Start date Start date Jul 8, 2017

Rusty67

20+ Year Stangneter
Dec 3, 2002
3,749
37
109
LA, CA
Jul 8, 2017
#1
  • Jul 8, 2017
  • #1
Normally I wouldn't even ask and just add the amount in the shop manual but when I took the plastic cap off to bolt on the AC hose manifold, there was already oil in there. I was trying to figure out if the compressor I bought came prefilled and the page says most assemblies are precharged with oil:
https://www.fordparts.com/Products/Air-Conditioning-Compressors.aspx

Being that I bought Motorcraft YCC322 I'm wondering if it was prefilled and I can just bolt it on and go. There is also a blue FoMoCo label on the pump that says oil amount 7oz. I'm not sure if that means there is 7oz in there or that 7oz is the amount of oil expected to be put into the pump.

Also, I got an accumulator, Motorcraft YF37396. I'm fairly sure this needs a small amount of PAG46 oil in it before I button the system up as per the shop manual. I wasn't able to see anything on it showing that it was prefilled.

Any info is much appreciated.
 

RaggedGT

Been here over a DECADE and still no CT
Mod Dude
Jul 20, 2014
4,740
3,189
203
41
Taylorsville ky
youtube.com
Jul 9, 2017
#2
  • Jul 9, 2017
  • #2
New compressors usually come with a 'shipping' oil in them. I'd drain it and refill it
 

Rusty67

20+ Year Stangneter
Dec 3, 2002
3,749
37
109
LA, CA
Jul 10, 2017
#3
  • Jul 10, 2017
  • #3
I talked to Ford and they said the part number comes prefilled with oil so I will drain it completely and double check that the amount they put in was correct.

They were not sure about the accumulator but being that it only takes a small amount and part of what it does is soak things up, I think I'll try to drain it but not worry too much.
 
You must log in or register to reply here.

Similar threads

B
water pump installation questions
  • B0udreaux
  • Feb 5, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
38
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 28, 2026
General karthief
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
530
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
Might have to get a Dart block but don't want to and if I do, then 363 instead of 331. Thoughts on what I've already bought so far.......
  • from6to8
  • Jul 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3
Replies
52
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 9, 2025
from6to8
  • Locked
Engine Might have to get a Dart block but don't want to and if I do, then 363 instead of 331. Thoughts on what I've already bought so far.......
  • from6to8
  • Jul 8, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
524
Fox 5.0 Mustang Tech Jul 8, 2025
Noobz347
Motor given to me and I’d like to rebuild it what do I need to do
  • Creomod
  • Dec 14, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
386
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 16, 2024
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?