• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

replacing Capri carb.

  • Thread starter Thread starter MercRS
  • Start date Start date May 4, 2008

MercRS

Member
Jan 15, 2003
55
1
8
Chicago,IL
May 4, 2008
#1
  • May 4, 2008
  • #1
I have a 85 Capri 5.0 w/T5
has a holley stock,need to replace with a new carb
would the holley 4160 would they be a direct bolt on?
summit isn't very clear on the description.
Or what would be better.It would be for street use only.
Thanks
 

Fast63

New Member
Sep 20, 2007
717
0
0
May 5, 2008
#2
  • May 5, 2008
  • #2
a 4160 is not a direct replacement, but this one is going to get as close as possible I think

http://store.summitracing.com/partd...9+4294839063+4294908331+4294925023+4294840126

It will keep you smog compliant probably. I have one for my 1985 mustang, but make sure when you get it and put it on you check for leaks and check your spark plugs to make sure you are getting a good burn. I had to send mine back to holley for some work, and I am still not happy with it. Just giving you a heads up.
 

MercRS

Member
Jan 15, 2003
55
1
8
Chicago,IL
May 5, 2008
#3
  • May 5, 2008
  • #3
cool thanks I almost bought the one I listed.What problems are you havingwith
it?
 

Fast63

New Member
Sep 20, 2007
717
0
0
May 5, 2008
#4
  • May 5, 2008
  • #4
Well the biggest problem I had when I first got it was that it was running super rich and I could not figure out why. I sent it to holley and they replaced the whole front float bowl and metering block as well as the baseplate. Then it stopped running rich, but they put some kind of resin on the sides of the float bowls to prevent leaks, but it is not very good stuff and there are leaks anyway. The needle and seat assemblies also start leaking sometimes and I have to re-tighten them. They also forgot to put the springs in the idle mixture screws when they sent it back to me, so I had to put in my factory ones.

Other than that, it seems to work pretty good. It's just frustrating, I wanted a carb I could buy and just bolt on without issues, especially at that price, but it wasn't the case. Holley will fix it for free if there is anything wrong, but you have to pay the shipping to send it to them.

One thing I forgot to ask earlier, do you have a factory metal fuel line running up that screws into the front of the front float bowl? Because that is how this carb is setup.
 

MY 85 GT

10 Year Member
Mar 7, 2008
1,852
208
104
New Jersey
May 6, 2008
#5
  • May 6, 2008
  • #5
Just my opinion...I would go with a 1406 edelbrock carb...its a 600 cfm and is the best out of the box carb you can buy...IMO...And very very easy to tune.....I have an 1806 650 cfm on my 85 and i love it.....
 

Fast63

New Member
Sep 20, 2007
717
0
0
May 6, 2008
#6
  • May 6, 2008
  • #6
MY 85 GT said:
Just my opinion...I would go with a 1406 edelbrock carb...its a 600 cfm and is the best out of the box carb you can buy...IMO...And very very easy to tune.....I have an 1806 650 cfm on my 85 and i love it.....
Click to expand...

I would have suggested that too, but he has emissions testing and would fail visual inspection immediately.
 

MY 85 GT

10 Year Member
Mar 7, 2008
1,852
208
104
New Jersey
May 7, 2008
#7
  • May 7, 2008
  • #7
Fast63 said:
I would have suggested that too, but he has emissions testing and would fail visual inspection immediately.
Click to expand...


I thought these carbs were 50 state legal???
 

Fast63

New Member
Sep 20, 2007
717
0
0
May 7, 2008
#8
  • May 7, 2008
  • #8
The 1406? They are not 50 state legal. Edelbrock does make a 50 state legal carb, but not for Fords.
 

Mustang78

New Member
Feb 8, 2006
486
0
0
Aberdeen, WA
May 8, 2008
#9
  • May 8, 2008
  • #9
mercRS-check out foureyedpride.com forums, from the list of your cars i'm sure you're more than welcome over there.. and you'll find out more info on your 79-86 mustangs and capri's than anywhere else IMO
 

MercRS

Member
Jan 15, 2003
55
1
8
Chicago,IL
May 9, 2008
#10
  • May 9, 2008
  • #10
I am on there its the best Capri site,
they don't even like those guys that put Mustang noses on!
 

85Vertible

New Member
Jun 1, 2007
41
0
0
May 9, 2008
#11
  • May 9, 2008
  • #11
Get a Edelbrock 600 w/elec choke and forget about it. You set the idle screws and never touch it again. Perfect out of the box.
 

Fast63

New Member
Sep 20, 2007
717
0
0
May 10, 2008
#12
  • May 10, 2008
  • #12
85Vertible said:
Get a Edelbrock 600 w/elec choke and forget about it. You set the idle screws and never touch it again. Perfect out of the box.
Click to expand...

Yes.... we have been through this. That is all fine and dandy until it comes time to smog the car.

So, does your capri need to be smogged in chicago? I bet it does....
 

MercRS

Member
Jan 15, 2003
55
1
8
Chicago,IL
May 10, 2008
#13
  • May 10, 2008
  • #13
I think 95 and older are exempt.
 

Fast63

New Member
Sep 20, 2007
717
0
0
May 10, 2008
#14
  • May 10, 2008
  • #14
ok I did a quick search on illinois smog laws and this is what is says:

Exempt Vehicles

The following vehicles are exempt from inspection:

* Motorcycles

* Vehicles first registered in 1967 or earlier

* Farm vehicles and "implements of husbandry"

* Antique vehicles 25 years or older

* Diesel-powered vehicles

* Electric vehicles (most hybrids will not be exempt)

* Vehicles for which a Junking Certificate has been issued


So he has 2 more years to go until he can be smog exempt, if and only if his car is registered as an antique vehicle. Otherwise, no dice.
 
You must log in or register to reply here.

Similar threads

L
Engine 85 GT Excessive Idle
  • lutzkecj
  • Sep 18, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
369
Fox 5.0 Mustang Tech Sep 21, 2026
86HO5.0
8
F
Electrical Foxbody wiring harness 2.3 to v8 swap
  • Foxbodyjake
  • Mar 23, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
26
Views
1K
Fox 5.0 Mustang Tech Sep 7, 2026
Kleinjj27
K
C
Bored with my 73
  • Curtis Harper
  • Apr 14, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
7
Views
375
1965 - 1973 Classic Mustangs -General/Talk- Apr 23, 2026
RaggedGT
S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
K
3.8 T5 & Bellhousing to 1987 Lincoln 5.0
  • ks65stang
  • Mar 2, 2026
  • Other Auto Tech
Replies
3
Views
564
Other Auto Tech Mar 3, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?