Replacing front turn signals

ufnavy06

Member

May 23, 2006

292

0

16

Jacksonville, Florida

Apr 11, 2007

#1

• Apr 11, 2007

• #1

I'm replacing my front turn signals with clear ones and unfortunately, I didn't get any instructions. If I'm thinking about this logically, and that's not always the case, all I have to do is remove the front fenders correct? Any one else done this? If so, how exactly and how long did it take you? Thanks.

 

S

Spdfreak

New Member

Feb 21, 2006

276

1

0

Apr 11, 2007

#2

• Apr 11, 2007

• #2

I think you just detach them from behind, no fender removal. I could be wrong, though.

 

anthony05gt

Active Member

Mar 18, 2006

1,262

1

37

Maryland

Apr 11, 2007

#3

• Apr 11, 2007

• #3

I did mine when I had the front fascia off of the car, but I think you could do it by removing the 3 phillips screws at the bottom of the wheel wells just in front of the tires, then pry the inner fender well from behind the fender lip. The light fixtures just clip in.

 

ShowYa06

New Member

Jul 2, 2006

144

0

0

Kansas City, MO

Apr 11, 2007

#4

• Apr 11, 2007

• #4

Easier if you take the bumper cover off the car, not the fenders.

 

kooldawg6

mine works really well and can take a fair amount

Aug 31, 2006

1,679

2

38

Central VA

Apr 11, 2007

#5

• Apr 11, 2007

• #5

From being under mine while changing the oil, it appears there may be enough room to do it with the front of the car on a set of ramps.

 

ufnavy06

Member

May 23, 2006

292

0

16

Jacksonville, Florida

Apr 13, 2007

#6

• Apr 13, 2007

• #6

Duh... I'm an idiot. Yeah taking the front bumper off or raising the car seems like the best idea. I got under the car today and noticed that. Thanks though for the nudge in the right direction.

 

ShowYa06

New Member

Jul 2, 2006

144

0

0

Kansas City, MO

Apr 13, 2007

#7

• Apr 13, 2007

• #7

Be sure you go easy, don't want to break the retainer clips on the bumper itself.