I'm going to pick up a T-5 later today to replace the grinding T-5 in my notch. I've atcully never done a T-5 but it looks rather simple. Found this writeup..
How to Remove a Mustang T5 Transmission
Anyone have a better one?
Also I noticed my rear shaft is leaking fluid, would it be a good idea to order a new seal? Once I get the driveshaft unbolted will it slide right out of the rear of the trans?
And last question is what is a good way to align the front imput shaft when re-installing it?
Any other tips or tricks I should know about or things I should replace while in there? I won't do the clutch as the previous owner put in a king cobra not too long ago.
How to Remove a Mustang T5 Transmission
Anyone have a better one?
Also I noticed my rear shaft is leaking fluid, would it be a good idea to order a new seal? Once I get the driveshaft unbolted will it slide right out of the rear of the trans?
And last question is what is a good way to align the front imput shaft when re-installing it?
Any other tips or tricks I should know about or things I should replace while in there? I won't do the clutch as the previous owner put in a king cobra not too long ago.