Reset the Computer with Pulleys?

[mcmmotorsports]

I know with my last car, I needed to disconnect the battery after every mod to reset the computer. Is it needed with my '04 Mustang on a Steeda Pulley install? I already did the install on Thursday and did it without disconnecting the Battery. Probably should have since I usually disconnect it whenever working under the hood.
Maybe that is why I tripped P0316, P0300, P0304 and P0307
I cleared the codes with my Predator twice and they haven't come back but I am just thinking now I need a reset.

 

[Cobra Jay]

I didn't disconnect the battery before or after when I did my U/D's. No SES light, or problems.

 

[mcmmotorsports]

I haven't seen any lights since Thursday and I doubt I will, I just wasn't sure if the puter adjusts for them.

 

[YtnGT]

There is no need to reset the computer after installing ud pulleys. You are just freeing up some power by minimizing the accessory parasitic losses.

 

[mcmmotorsports]

That's what I thought, just wanted to be sure though.

 

[Darkhorse845]

Pulleys

When I installed my Steeda Underdrive Pulleys I didn't reset the computer
and I had no problems at all.I guess every car is different after all.

 

[SunburstGoldGT]

Are those error codes for misfire? I had 2 codes after i installed my steeda's also, but like you suggested i just pulled the battery cable let it sit and it fixed it no problem. I wish i had a predator...

 

[ChrisGT]

Are those error codes for misfire? I had 2 codes after i installed my steeda's also, but like you suggested i just pulled the battery cable let it sit and it fixed it no problem. I wish i had a predator...

Yes, they were misfire codes for #4 and 7 cylinder if I remember correctly!

Mike, glad to hear you got everything worked out with your car!

 

[mcmmotorsports]

Are those error codes for misfire? I had 2 codes after i installed my steeda's also, but like you suggested i just pulled the battery cable let it sit and it fixed it no problem. I wish i had a predator...

Yup, misfire detected on startup cyl #4 and #7. Interesting that someone else experienced it too.