• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

rocker arm ??

  • Thread starter Thread starter 89CobraGT
  • Start date Start date May 7, 2008

89CobraGT

New Member
Dec 14, 2005
113
0
0
Winnipeg manitoba
May 7, 2008
#1
  • May 7, 2008
  • #1
ok Sorry for another rocker question but im soo confused... K so I'm getting my new motor built so I put my old not so stock motor back together... I was orginally under the impression that my rocker arms were stock. They have stock arms with that curved spacer, the regualr spacer and a regular nut on top.. Soo the first time I did them I torqued them down .. big mistake thought I bent valve took heads off ect.. K so its back together agian *sigh* the old owner told me he modified the rockers so they were adjustable with some kit or something. He told me I wait for the lifter to be seated down all the way then tighten the nut till the pushrod barely moves then give it a 3/4 turn... So I'm trying this and by the time the pushrod stops moving the nut has already bottomed out.. Keep in mind this motor was running not long ago and I did not change a thing on it soo im under the impression it just should have bolted back the way it was can someone tell me what to do or what im doing wrong?
 

bullitstang1313

Member
Jan 21, 2003
713
0
16
Indianapolis / Columbus, Indiana
May 8, 2008
#2
  • May 8, 2008
  • #2
Stock rockers are bolt down or pedestal mount rockers. The only way to adjust pedestal mount rockers is to put in shims. If you truly have a nut and stud setup then you will need to adjust your rockers per stud mount rocker installation instructions.
 
You must log in or register to reply here.

Similar threads

K
Engine Gt40p vs 180 procomp
  • Kleinjj27
  • Oct 27, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
492
Fox 5.0 Mustang Tech Nov 3, 2026
Kleinjj27
K
C
Shifter lever arm issue
  • chris1993
  • Jan 18, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
274
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 24, 2026
Rcdgl
R
J
MEED HELP!! 86 mustang
  • Jacob0121
  • Jan 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
485
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 25, 2026
CAMTWO1070
G
Resolved Smoking Wiring Issue After GT40 Head Swap
  • Grapes
  • Aug 15, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
589
Fox 5.0 Mustang Tech Aug 22, 2026
Grapes
G
A
Engine Genius installed oil filler above rocker arm…
  • afjLX
  • Mar 27, 2025
  • Fox 5.0 Mustang Tech
Replies
5
Views
667
Fox 5.0 Mustang Tech Mar 29, 2025
nicholase
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?