Rockers and Valve Covers???

[LoudToy958]

I have been digging throught threads for a few days now.

Combo will be
Kenne Bell Blow/Flow
42lbs Injectors
Unsure of MAF
FOX TB Conversion - another ?

Question is, I plan on a set of AFR 165 61cc Aluminum Heads. I am gonna sell off my gt40s with the rockers, and I don't want to have to buy taller VCs due to the KB install. What rockers would be a good choice, and will they fit the stock VCs?

Still need more info on TB size, and cam selection.

Thanks in advance all

 

[final5-0]

I run Scorpion rr's on my stud mount AFR's.

Those are some of the largest rr's you find around the Mustang community.

I use Fox vc's and they work fine with a little modification here and there.

Use my name in a search and go back like three years and you will see my old threads and many other peeps who did the same. Those old threads were very detailed and many of them even had pics.

The great thing about the Fox vc's is you gain room for larger rr's but they are just a tiny bit taller than the stock 94-95 oem covers.

Bet they would work just fine with your KB

The KB guru is Don 95Vert so you may can look and see which covers he used when he was running his KB.

btw ... if you use ped mount rr's, I think they will fit fine under the stock vc's.

You will have to check to make sure but I think you can run the Comp steel rr's under the stock vc's as well

Grady

 

[LoudToy958]

I run Scorpion rr's on my stud mount AFR's.

Those are some of the largest rr's you find around the Mustang community.

I use Fox vc's and they work fine with a little modification here and there.

Use my name in a search and go back like three years and you will see my old threads and many other peeps who did the same. Those old threads were very detailed and many of them even had pics.

The great thing about the Fox vc's is you gain room for larger rr's but they are just a tiny bit taller than the stock 94-95 oem covers.

Bet they would work just fine with your KB

The KB guru is Don 95Vert so you may can look and see which covers he used when he was running his KB.

btw ... if you use ped mount rr's, I think they will fit fine under the stock vc's.

You will have to check to make sure but I think you can run the Comp steel rr's under the stock vc's as well

Grady

Hey, thanks Grady. Just the info I was looking for. I didn't go back quite that far. I will dig a little deeper and see what I come up with. Thanks for the great starting point. Shane