My buddy is giving me his freshly rebuilt 306 with 351 heads and a edelbrock performer rpm cam #7122. All it needs is rockers and push rods. What type of rockers would you guys recommend?
My buddy is giving me his freshly rebuilt 306 with 351 heads and a edelbrock performer rpm cam #7122. All it needs is rockers and push rods. What type of rockers would you guys recommend?
The cam you are running has an intake lift of .496 and an
exhaust lift of .520. Adding 1.7 rockers will get you
.527 on the intake and .552 on the exhaust. I read somewhere
that the max lift of 351 heads was around .500 but I couldn't
be sure I would check that before committing to the 1.7 rockers.
The cam you are running has an intake lift of .496 and an
exhaust lift of .520. Adding 1.7 rockers will get you
.527 on the intake and .552 on the exhaust. I read somewhere
that the max lift of 351 heads was around .500 but I couldn't
be sure I would check that before committing to the 1.7 rockers.