Ok, I bought a 90 LX about 2 or 3 weeks ago, the guy I bought it from estimated the setup made 550 hp and 500 ft lbs of torque, and Im pretty sure he was talking at the fly, not the wheels. Any idea of what its putting on the ground?
My setup is:
351w bored to a 356, all forged Bullet Proof bottom end cranks turned 10 thousandths h-beam rods kieth black flat top pistons moroso 8 qt. double hump oil pan edlebrock rpm heads port matched to edlebrock air gap intake high rise holly 700 carb freshly rebuilt double pumper mechanical secondaries k&n tri-mouth air cleaner ignition is all msd pro bullit distributor backed by a 6al box msd cap and rotor. fuel is a holly blue pump all 1/2 line to regulator and 3/8 to carb 13 gallon fuel cell in trunk along with battery relocate. all backed by a built tremic T5 and king cobra clutch. 8.8 rear with 3.73 gears
My setup is:
351w bored to a 356, all forged Bullet Proof bottom end cranks turned 10 thousandths h-beam rods kieth black flat top pistons moroso 8 qt. double hump oil pan edlebrock rpm heads port matched to edlebrock air gap intake high rise holly 700 carb freshly rebuilt double pumper mechanical secondaries k&n tri-mouth air cleaner ignition is all msd pro bullit distributor backed by a 6al box msd cap and rotor. fuel is a holly blue pump all 1/2 line to regulator and 3/8 to carb 13 gallon fuel cell in trunk along with battery relocate. all backed by a built tremic T5 and king cobra clutch. 8.8 rear with 3.73 gears