• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

RPM jumps around when A/C is on

  • Thread starter Thread starter neikoblu
  • Start date Start date Jun 9, 2005

neikoblu

New Member
May 9, 2005
63
0
0
Barksdale AFB, Lousyanna
Jun 9, 2005
#1
  • Jun 9, 2005
  • #1
I got my A/C charged and when I turned it on, I noticed that at an idle my car almost died and one time it did. The idle jumps from like 1100 to 450 or so, UP and DOWN. When I turn the A/C off, the engine starts to level out. It just pisses me off. This idle bull**** is the only thing that I can't figure out and the only thing that pisses me off about my car. Any ideas!
 

5.0 con-vert

No soup for you, Joe Rogan!!!
Jun 7, 2005
244
4
39
Boca Raton, FL
Jun 9, 2005
#2
  • Jun 9, 2005
  • #2
That seems pretty bad. I know that once that compressor kicks into gear it usually drops the RPM's a little bit but not like what you are experiencing. Is that compressor in rough shape and just giving too much resistance for the motor to handle? Maybe the bearings in that are about shot
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Jun 9, 2005
#3
  • Jun 9, 2005
  • #3
Mine does the same thing...but not quite the rpm jump your experiencing. I think it is happening when the alternator is getting overrun possibly on mine because when my a/c is running my e-fan kicks on as well...???

The a/c drag might be lowering the rpm of your engine and then it trys to compensate it (to keep from dieing) and "overrevs" it...

What is your idle set at normally?
 

neikoblu

New Member
May 9, 2005
63
0
0
Barksdale AFB, Lousyanna
Jun 10, 2005
#4
  • Jun 10, 2005
  • #4
My idle is set at about 800-900 but when the a/c is on it drops pretty low. I have a 3g alternator so the charging is not a problem. Really the car wont idle very well with the a/c off I give it some gas after I start it and it idles out okay. But after the initial start it jumps around for a minute before the idle settles down. I have set the TPS to .98 and I put one of those IAC spacers in hoping that would fix it. Would the EGR play a role in the idle problem?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jun 11, 2005
#5
  • Jun 11, 2005
  • #5
Se the Sticky " Help me create the Surging Idle Checklist" at the top of the forum for help.
 
J

jaackal

New Member
May 12, 2003
402
0
0
NJ
Jun 12, 2005
#6
  • Jun 12, 2005
  • #6
this happen to me before and the high pressure switch was shot, it also happened to my brother and it was his oxygen sensors
 
You must log in or register to reply here.

Similar threads

7
Engine Random hanging idle
  • 706 Saleen
  • Feb 11, 2026
  • Fox 5.0 Mustang Tech
Replies
9
Views
645
Fox 5.0 Mustang Tech Feb 19, 2026
86HO5.0
8
W
1993 LX 5.0 dies after ignition parts replacement
  • Warhorse85
  • Aug 16, 2025
  • Fox 5.0 Mustang Tech
  • 5 6 7
Replies
122
Views
3K
Fox 5.0 Mustang Tech Nov 4, 2025
General karthief
C
Engine Idle cuts out
  • claypoolxx
  • Mar 7, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
756
Fox 5.0 Mustang Tech Friday at 5:04 PM
alutwon
Engine Defective PIP sensor ?
  • bock
  • Sep 5, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
20
Views
1K
Fox 5.0 Mustang Tech Oct 11, 2025
Mindseye007
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
720
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?