Runnig close to redline?

BOSS4.6L

New Member

Apr 10, 2005

63

0

0

Montana/Arizona

Dec 30, 2005

#1

• Dec 30, 2005

• #1

Running close to redline?

Hey! just a quick question. I have an 05 gt and I baby it most of the time but every once in a while I drive it hard usually showing off to some ricer. Anyways my question is how hard is it on the engine to run it close to redline, like say within 1500 rpm's? I have only done it about five times and I only let it stay there for maybe a second or two. Should I even be worrying about it or not.

 

S

ski

Member

Dec 14, 2004

380

2

18

Dec 30, 2005

#2

• Dec 30, 2005

• #2

4500-5000 rpm is not a concern. Just make sure the engine is fully warmed up, and it's not pinging.

 

H

halflife1

New Member

Jul 1, 2005

72

0

0

Dec 30, 2005

#3

• Dec 30, 2005

• #3

i take it to the redline on every gear, all day long. I would not worry much if you drive it like you said. my tune even allows to go past the redline without the engine cutting out if i wanted to.

 

BOSS4.6L

New Member

Apr 10, 2005

63

0

0

Montana/Arizona

Dec 30, 2005

#4

• Dec 30, 2005

• #4

Thanks! I think I am gonna stop worrying about it.

 

bigcat

start with the upper hole, and if more traction is

May 1, 2005

3,015

1

79

7200 feet

Dec 30, 2005

#5

• Dec 30, 2005

• #5

yep dont worry, ford wouldnt let you damage your car that way. otherwise they would be warranting many engines. thats why they put the electronic controls to limit the RPMs.

 

F

FL2005GT

New Member

Oct 28, 2005

100

0

0

Dec 30, 2005

#6

• Dec 30, 2005

• #6

Have fun, go balls out once in a while, don't worry about it. Ford put on a VERY aggressive rev limiter, doesn't even let you keep bouncing off the limiter. Now, powershifting at redline all the time, or even chirping 2nd a lot...that, I wouldn't do. Save that for the races.

 

Motorhead6T5

New Member

Oct 21, 2004

215

0

0

Marysville,CA

Dec 30, 2005

#7

• Dec 30, 2005

• #7

I bounce mine off the 6800 rev limiter regularly,you should be fine.

 

bigcat

start with the upper hole, and if more traction is

May 1, 2005

3,015

1

79

7200 feet

Dec 30, 2005

#8

• Dec 30, 2005

• #8

i chirp 2nd and 3rd almost every time, but i dont go to redline.......

 

Motorhead6T5

New Member

Oct 21, 2004

215

0

0

Marysville,CA

Dec 30, 2005

#9

• Dec 30, 2005

• #9

Theirs no point in reving past 6k on the stock tune anyways,your just gonna be going slower.

 

F

FL2005GT

New Member

Oct 28, 2005

100

0

0

Dec 31, 2005

#10

• Dec 31, 2005

• #10

Stock (except for Flowmaster AT's), my 5-speed doesn't chirp third unless I really get on it, full out, and it's a smooth road surface. Matter of fact, I think it's only done it once, when I was running against a Lightning.

I don't think I've ever power shifted in any of my cars, even when racing. I always do a quick, but almost full, clutch lift. Does anyone powershift in their 2005+? How does the drivetrain seem to handle it?

 

G

gp001

Founding Member

Jun 30, 2001

4,401

0

66

So. Cal.

Dec 31, 2005

#11

• Dec 31, 2005

• #11

Motorhead6T5 said:

Theirs no point in reving past 6k on the stock tune anyways,your just gonna be going slower.

Click to expand...

What are you talkin about? When yoou get the needle into the redline then blue flames shoot out of the exhaust like fast & furious

 

BOSS4.6L

New Member

Apr 10, 2005

63

0

0

Montana/Arizona

Jan 1, 2006

#12

• Jan 1, 2006

• #12

gp001 said:

What are you talkin about? When yoou get the needle into the redline then blue flames shoot out of the exhaust like fast & furious

Click to expand...

Oh!! and don't forget that the paint starts to fall off and it looks like you are going the speed of light, and bolts start falling out.

 

Motorhead6T5

New Member

Oct 21, 2004

215

0

0

Marysville,CA

Jan 2, 2006

#13

• Jan 2, 2006

• #13

gp001 said:

What are you talkin about? When yoou get the needle into the redline then blue flames shoot out of the exhaust like fast & furious

Click to expand...

Must be the VVT

 

GenoTex

Member

Sep 26, 2005

32

0

6

Mar 5, 2006

#14

• Mar 5, 2006

• #14

Rev Limiter maxes?

Motorhead6T5 said:

I bounce mine off the 6800 rev limiter regularly,you should be fine.

Click to expand...

6800? more like 6200... what are some of the highends on the limiters from any of you out there? Tuned to higher limits, and if so, how high?
Mine's an auto 2005, I have installed K&N CAI and SLP loudmouths, and sure would like to see higher revs....

Thanks for any input.

 

SrA FlyBoy

New Member

Jan 5, 2006

7

0

0

Tulsa

Mar 6, 2006

#15

• Mar 6, 2006

• #15

GenoTex said:

6800? more like 6200... what are some of the highends on the limiters from any of you out there? Tuned to higher limits, and if so, how high?
Mine's an auto 2005, I have installed K&N CAI and SLP loudmouths, and sure would like to see higher revs....

Thanks for any input.

Click to expand...

I have the Pradator 91 Octane tune installed in my car, and I set the rev limit at 6500. I have never had a problem with it, and I do come close, if not bounce of the limiter quite a bit. She loves it. (my car and my wife)
I would not go too much higher unless you plan on doing some valvetrain work. Like better springs and retainers. Otherwise you will start to see valve float, which just kills your power.

 

D

D.Hearne

New Member

Sep 29, 2000

11,730

6

0

south louisiana

Mar 6, 2006

#16

• Mar 6, 2006

• #16

After reading all this, and having my butt chewed on for such talk----- Y'ALL ARE IF FOR IT NOW!!!!!!! Mr. Moderator?

 

P

Pro Mod

Member

Nov 16, 2005

236

0

16

Wharton, WV

Mar 6, 2006

#17

• Mar 6, 2006

• #17

FL2005GT said:

Does anyone powershift in their 2005+? How does the drivetrain seem to handle it?

Click to expand...

I powershift mine any time I race... I can powershift this car MUCH easier than the TKO in my 5.0! The only reason I'd even like to have an aftermarket shifter is for the adjustable stops; but I see that Ford has a "cap" available that goes on top of the shifter base and adds the shifter stops. I'm just afraid of bending a shift fork.
I haven't had the car long, so I can't tell you how well the driveline holds up to the wear & tear. But it is releatively easy to powershift these cars IMO.

 

dpjedi

Founding Member

Feb 11, 2000

392

0

16

Plant City FL (east of Tampa)

Mar 7, 2006

#18

• Mar 7, 2006

• #18

Took my car to redline more in the first 150 miles than I did my previous Stang (96 GT) in 4 years Now with 19K miles on the clock, not a hint of trouble of any kind with the engine. It gets taken to redline at least once a day now

 

GenoTex

Member

Sep 26, 2005

32

0

6

Mar 8, 2006

#19

• Mar 8, 2006

• #19

Good info...

SrA FlyBoy said:

I have the Pradator 91 Octane tune installed in my car, and I set the rev limit at 6500. I have never had a problem with it, and I do come close, if not bounce of the limiter quite a bit. She loves it. (my car and my wife)
:

Click to expand...

thx for the info

K&N CAI and SLP LM's... gonna go to 6500 .....


dpjedi
Took my car to redline more in the first 150 miles than I did my previous Stang (96 GT) in 4 years Now with 19K miles on the clock, not a hint of trouble of any kind with the engine. It gets taken to redline at least once a day now


wouldn't know how NOT to take it to redline

 

D

dreem363

New Member

Jan 24, 2006

7

0

0

Mar 8, 2006

#20

• Mar 8, 2006

• #20

Sorry but I have 2 stupid questions. What is chirping and how do I do it in 2nd and 3rd gear? Is chirping burning rubber? How do I power shift? I have no idea what powershifting is. I have been driving stick shift for about 2 months and I still have to learn a lot about enjoying all the benefits of a stick shift. I have a 2006 torch red GT.