Running new fuel lines, Front - back. Help out

MustangOwner

Banned
Dec 13, 2006
160
0
0
Hey guys i have a fox and my dyno guy informed me that i should upgrade my fuel lines. I have BBK fuel rails and the regulator and pump. I just need all new plumbing front tank to the rails. I'd like to run the braided becuase it looks nice and emits fuel smells.

Is that the correct fuel size lines i should be running?

Heres a list of what i've come up with so far.
10ft - 8an push loc hose/braided hose
http://store.summitracing.com/partde...5&autoview=sku
10ft - 6an push loc hose/ braided hose
http://store.summitracing.com/partde...5&autoview=sku
Aeromotive y-fuel block
http://store.summitracing.com/partde...5&autoview=sku

and fittings...
Could anybody help me out with what fittings i need to buy to hook it all up. I've been reading the summit racing site but the whole female - male fitting is confusing. Or atleast i dont 100% understand it yet.

And a Aeromotive Fuel Filter to replace the stock unit
http://store.summitracing.com/partde...5&autoview=sku
^^but that says it has a -10 an fitting and i'm running -8 an lines.... Can i put a converter on there or somethign? lol. Help

And i know i'll be needing all the 90 and 45 degree angle fittings so that i can run them under my car. But help please.
 
  • Sponsors (?)


Ummm, what are you planing on running? Unless its a aftermarket block theres no need, your block will split before you need aftermarket fuel lines to support more power.

It is the stock block, #'s will be around 500 rwhp. Eventually i'll have a Boss block or something else a little more tuff. Reread the first post, i "modifyed" it.