Ryan218 Progress thread..lots o pics.

ryan218 · Sep 13, 2007

RsStanG1987 said:
Do you know where ford gets its paint? The same company that makes mine. the paint age dosent matter on the price its the color that makes te price. Reds yellows and oranges being the most expensive.. Once again im not hating but its not the paint that lasted 19years its the prep that goes into it. The place im getting my paint frm gives me the price of the dealership in which i work,cost on paint. And my paint is a cheaper color. The color is a big factor in price but the age of it isnt. My old car had the same color on the front of it.

no ****......BUT like ive said before...this aint the first car ive painted....this will be the 3rd....im gonna to spay this one myself.....only thing that i wont be doing is welding in the patch panel for the right rear 1/4....other then that and them helping with sanding and such with body work so it gose quicker it will be done by myself....give me a bit....it will be fine...i dont need anyone telling me who the stuff im using will cost....

look at it this way....if i ask for advice then i will use what is told to me...but im tired you ****ing up my thread with all the bole **** that spills out of your mouth...keep it in your thread....and out of mine

excuse my spelling im at school and im in ahurry to type this before autocad starts...

later...

87Mustang351 · Sep 13, 2007

simmer down ryan, lol he does have a good point!

ryan218 · Sep 13, 2007

87Mustang351 said:
simmer down ryan, lol he does have a good point!

well duh.....the finish is in the prep work....even a todler would know that..you guys just dont even know how bad my dads mustang was...the driver side literaly waved at you becase years back it was ran off the road...

my car will in the end be fine....

lay of RS...i dont come into your threads critizing you work and id appreciate it if you do the same..

iLkYsPoNy · Sep 13, 2007

It's like each time I check into this thread for your progress Ryan you're arguing with RS. Just ignore the guy.... you're coming along nicely. Plus, who knows how many times 85ragtop wants to tell ya'll to be nice.

ryan218 · Sep 13, 2007

iLkYsPoNy said:
It's like each time I check into this thread for your progress Ryan you're arguing with RS. Just ignore the guy.... you're coming along nicely. Plus, who knows how many times 85ragtop wants to tell ya'll to be nice.

mhm...no one is more tired of hearing it then me...

foxmustangman · Sep 13, 2007

We all hate him...you just have to learn to ignore him when he starts bashing in on your thread.

You're doing an awesome job on the stang, and you're lucky to have a dad to support you in all of this. I wish i could claim to have done as much as you have. You've got spunk, and tons of it. Keep up the good work...and dont let rs get you down. He has no one in his life to keep him happy.

ryan218 · Sep 13, 2007

foxmustangman said:
We all hate him...you just have to learn to ignore him when he starts bashing in on your thread.

You're doing an awesome job on the stang, and you're lucky to have a dad to support you in all of this. I wish i could claim to have done as much as you have. You've got spunk, and tons of it. Keep up the good work...and dont let rs get you down. He has no one in his life to keep him happy.

very true...

anyways...

i just have a question... is it possiable to use bullets with MK7 rotors...one guy told me with alot of beating on the dust caps he got his to fit? what about if i used a 1/4 spacer for the front with the 05+ back spacing?

Bad92GT · Sep 13, 2007

ryan218 said:
very true...

anyways...

i just have a question... is it possiable to use bullets with MK7 rotors...one guy told me with alot of beating on the dust caps he got his to fit? what about if i used a 1/4 spacer for the front with the 05+ back spacing?

gonna probably need 1/2.. 5/16th is what it took to make 06 bullets fit my 98 gt in the front and 1 1/2" out back to get the stance right

ryan218 · Sep 14, 2007

Bad92GT said:
gonna probably need 1/2.. 5/16th is what it took to make 06 bullets fit my 98 gt in the front and 1 1/2" out back to get the stance right

oh ok...well my buddy has a set of 18" bullets that i can "test fit" after i get the swap done...

i got to work saturday and sunday... i was hoping to have sunday off to go to pick and pull....maybe ill still be able to make it....idk though

stykthyn · Sep 14, 2007

get a markVII rotor and test fit it on the bullit, if it doesnt work return it and say you dont need it. I did that with my split 5's. it wouldnt work for me unless I beat the hell out of the dust cap, and I just didnt trust running it like that

ryan218 · Sep 14, 2007

stykthyn said:
get a markVII rotor and test fit it on the bullit, if it doesnt work return it and say you dont need it. I did that with my split 5's. it wouldnt work for me unless I beat the hell out of the dust cap, and I just didnt trust running it like that

'

should of worked with split 5's

BlownFiveLiter · Sep 14, 2007

85ragtop has spoken. Ryan & Rs both calm down. I'm not here to point fingers at either one of you, so I don't want to hear "he started it." One of the moderators has spoken, so get along or infractions start being handed out. End of story.

ryan218 · Sep 14, 2007

StangGT1995 said:
85ragtop has spoken. Ryan & Rs both calm down. I'm not here to point fingers at either one of you, so I don't want to hear "he started it." One of the moderators has spoken, so get along or infractions start being handed out. End of story.

yes sir!

RsStanG1987 · Sep 14, 2007

Im going to advise you not to run spacers.. Search underpressuregt and let the hilarity and reason not to use spacers ensue.

ryan218 · Sep 14, 2007

RsStanG1987 said:
Im going to advise you not to run spacers.. Search underpressuregt and let the hilarity and reason not to use spacers ensue.

spacers are on my dads stang with no problem....

Aaron · Sep 14, 2007

I agree with RS on this one..spacers are dangerous.

Bad92GT · Sep 14, 2007

aaron11272 said:
I agree with RS on this one..spacers are dangerous.

hub centrics work great actually.. they put the weight on the hub, the same as the wheel does

BlownFiveLiter · Sep 14, 2007

I agree Steven, however make sure you get a quality part. Cheapo parts store spacers are much more prone to breaking than a good billet set. If you get spacers, make sure they're billet aluminum or steel, and that they're hub centric. I've heard arguments for both sides on whether to get a set that has its own studs, or using longer studs that reach through the spacer to the wheel, and either has its advantages, but make sure they're hardened studs in either case.

hsean · Sep 15, 2007

great job keep it up

ryan218 · Sep 15, 2007

hsean said:
great job keep it up

i like replies like that..thats my motavation...and RS....and you doughtful bunch...yours are even more of a kick in the rear to get it done

Ryan218 Progress thread..lots o pics.

ryan218

In just 10 years, I'll be old enough to drive!!!!

87Mustang351

Member

ryan218

In just 10 years, I'll be old enough to drive!!!!

iLkYsPoNy

if she's a tranny then... well I'd do her.... it..

ryan218

In just 10 years, I'll be old enough to drive!!!!

foxmustangman

Member

ryan218

In just 10 years, I'll be old enough to drive!!!!

Bad92GT

The 5 Minute Plan Man

ryan218

In just 10 years, I'll be old enough to drive!!!!

stykthyn

I want to measure mine. It doesn't look that tall.

ryan218

In just 10 years, I'll be old enough to drive!!!!

BlownFiveLiter

have car, will race....wait, it doesn't run

ryan218

In just 10 years, I'll be old enough to drive!!!!

RsStanG1987

I shaved all my pubes playing this game.

ryan218

In just 10 years, I'll be old enough to drive!!!!

Aaron

Bad92GT

The 5 Minute Plan Man

BlownFiveLiter

have car, will race....wait, it doesn't run

hsean

ryan218

In just 10 years, I'll be old enough to drive!!!!

Similar threads

Ryan218 Progress thread..lots o pics.

In just 10 years, I'll be old enough to drive!!!!

Member

In just 10 years, I'll be old enough to drive!!!!

if she's a tranny then... well I'd do her.... it..

In just 10 years, I'll be old enough to drive!!!!

Member

In just 10 years, I'll be old enough to drive!!!!

The 5 Minute Plan Man

In just 10 years, I'll be old enough to drive!!!!

I want to measure mine. It doesn't look that tall.

In just 10 years, I'll be old enough to drive!!!!

have car, will race....wait, it doesn't run

In just 10 years, I'll be old enough to drive!!!!

I shaved all my pubes playing this game.

In just 10 years, I'll be old enough to drive!!!!

The 5 Minute Plan Man

have car, will race....wait, it doesn't run

In just 10 years, I'll be old enough to drive!!!!

Similar threads

Privacy & Transparency

Privacy & Transparency