• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Safe ShoT???

  • Thread starter Thread starter Guero
  • Start date Start date May 8, 2006

Guero

Active Member
Oct 11, 2005
2,148
0
47
May 8, 2006
#1
  • May 8, 2006
  • #1
Whats a safe shot i can run on nitro? with 1 degree colder plugs set at stock gapping, and at 14 degree timimg. member i can adjust my fuel now, 255 lph pump, 30lbs injetors. heads and cam
 
Z

zZsKyZz

Member
Dec 1, 2005
503
0
17
May 8, 2006
#2
  • May 8, 2006
  • #2
my vote is to stay at 100 or less... you can probably go up to 150, but I wouldn't if your internals are stock.

but that's just my opinion.
 

blksn955.o

Founding Member
Mar 15, 2002
3,263
0
66
st.louis mo 314
May 8, 2006
#3
  • May 8, 2006
  • #3
You will want to turn down the timing to around 9-10*. You also may run into a spark blow out at higher rpm with the stock gap on the plugs.

The only way I would run 14* without a sep. tune to switch to for n2o would be to use a msd digital6+ or something like that having the ability to retard timing when the n2o is activated. This way you could run 14* off the bottle and 9-10* while spraying.
 

Guero

Active Member
Oct 11, 2005
2,148
0
47
May 8, 2006
#4
  • May 8, 2006
  • #4
im gonna do a 75 shot, since its only like 60 on the zex kit. and i will retard the timing to, i know i mentioned i was at 14 but didn't mention i would go back down to stock on the spray
 
Y

yellow1995Cobra

New Member
Dec 23, 2002
2,959
2
0
Massachusetts
May 8, 2006
#5
  • May 8, 2006
  • #5
u can pick up a MSD timing adjuster for pretty cheap.. If you already have a msd 6al box ( u should get one if you dont) it piggy backs right in with it. Its nice cause you can adjust your timing in your car with the turn of a knob..
 

Guero

Active Member
Oct 11, 2005
2,148
0
47
May 8, 2006
#6
  • May 8, 2006
  • #6
dont have either. are they hard to install?
 
You must log in or register to reply here.

Similar threads

1
Crank no start on a turbo and cammed pushrod 5.0
  • 1630stri
  • Sep 2, 2026
  • Digital Self-tuning Forum
Replies
2
Views
214
Digital Self-tuning Forum Sep 16, 2026
Qtrhrse23
3
393W Stroker with Boost - Need Spark Plug Recommendations
  • 387lx
  • Apr 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
380
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 30, 2026
HotFox
S
Fox '87 GT can't get to stay running
  • spilly
  • Mar 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 20, 2026
spilly
S
Progress Thread Progress Thread- From6to8's 95 GT/Saleen Supercharged 331 install
  • from6to8
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 28, 2026
from6to8
Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
243
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?