Saleen 18x9 From 2002 On My 1990 Gt

Real 9 inch saleen new edge wheels should be 25mm fronts and 12mm rear offset.

Will they fit? It's going to be close, I ran my wheels before I went to 94/95 spindles, bullet calipers and cobra rear discs. I think I just flattened the dust cap. But mike is right, buy a rotor and try it. I don't know how the extra width and offset affect how they fit.

I have them reversed, when the 30mm wheels should be in the front, I have them in the back and the 10mm's in the front.

Me personally, I wouldn't go through the trouble of pulling the rear axles and not goto discs. But i'm aware that route will spend quite a bit more money.
I have one vehicle of 5 left with rear drums after that truck is gone, I never want to see a drum ever again.

I know I didn't give a definitive yes or no, but now at least you have some numbers to work with.

BTW, if the wheels do work, tire size is going to have to be spot on.

racer_inboston said:

They are a set of all around 25mm backspacing...saleen stamped on all 4 wheels 18x9. The svo lincoln rotors may need to be machined on the snout.

Click to expand...

Only pointing this out because there's a huge difference between the two, but, 25mm is the offset not the backspacing.