Schrader Valve To An Fitting

[sen2two]

I am looking for a schrader valve fitting that goes from 1/16th NPT to -4 male AN to connect my fuel feed line to my nitrous soleniod.

I come up empty on a few searches... Couldnt even find it on Jegs.

 

[sen2two]

Never mind. Found it only a few moments after posting this...lol

 

[madspeed]

You should post a link for those that stumble upon this later

 

[sen2two]

Your right. Pay it forward... lol

This is the one I got. Can't beat 5 bucks. They have a few choices all the way up to 30+ dollars. Its just a fitting. I don't see the differences so I got the Jegs fitting.

http://www.jegs.com/webapp/wcs/stor...ctId=675364&storeId=10001&sType=&pgGrp=search

 

[sen2two]

The fitting size is 1/16NPT to AN. You can search that in Jegs.

 

[madspeed]

Thats the spirit, thanks!

 

[srtthis]

http://www.summitracing.com/search/...npt-fittings/an-size/minus-4/npt-size/1-16-in

i have the nitrous express fitting on mine
dont use teflon tape on the NPT threads. use pipe dope

 

[madspeed]

mmmm pipe dope

 

[sen2two]

Never heard of pipe dope. Can you get it at home depot or similar?

Is it safe to use on fuel and nitrous lines?

 

[madspeed]

basically, its liquid teflon tape. should be in the plumbing section next to the tape and plumbers putty

 

[Grabbin' Asphalt]

mmmm pipe dope

 

[srtthis]

Never heard of pipe dope. Can you get it at home depot or similar?

Is it safe to use on fuel and nitrous lines?

yes should be used in place of Teflon tape on all nitrous and fuel fittings

 

[mikestang63]

yes should be used in place of Teflon tape on all nitrous and fuel fittings

yep yep. NEVER use teflon tape on fuel or Nitrous lines. Pieces of the tape can clog the fittings or worse break off and end up in an injector or solenoid.