Selling what I have...Prices in paranthesis are what I paid
First:
1966 mustang coupe Including:
No engine, no trans
cowl replaced ($700)
Great interior, including headliner, new door panels, and seats($400)
Dash pad removed and smoothed
Good glass - no windshield though
Rstyle Front Apron with removeable chin spoiler($200)
California Special decklid with moldedin end caps ($500)
New 4.5 leaf mid eye leafs ($200)
Cal-Trac Traction Bars ($350)
Edelbrock IAS shocks ($200)
Powdercoated trans mount($100)
Clean underside
Replaced floor pans($700)
Scotts Hot Rod Adjustable front suspension...coated silver ($2500) -see sourappleperf.com for explanation
Chromed Manual rack and pinion (no steering shaft)($350)
17x8" Chrome Bullets with Kumho 225/45 in front and Nitto 555R 245/45 in rear ($1500)
9" posi rear with 3.50 gear($500)
GT rear valance ($150)
Chrome rear bumper($150)
Large, Aluminum radiator...new($300)
Holley Blue pump and regulator($150)
New gas tank...powdercoated chrome($150)
Back half of car is primed
Doors are on, but need to be fitted
Fenders on, but need to be fitted, along with the rest of the front end (all grills, headlights, buckets, housings, etc included...just need a hood
Need motor mounts
I am sure that I am missing a few things. I have nearly 8500 invested, not including the car itself....
$5200 OBO
Second:
Engine
331 Stroker
Ross 9.1:1 compression pistons for TW heads
Hbeam rods
hawks racing crank
Block was bored and hot tanked and notched for stroker
DSS PRO girdle and windage tray
ARP bolts throughout
TW heads with upgraded springs
XE274HR camshaft
MSD Probillet Dist
Edelbrock RPM Intake (carb)
Powdercoated Timing cover
Noisy gear drive
Cobra valve covers
Misc gaskets
Engine balanced to 28oz
28oz SFI flexplate for C4 trans
New Harmonic Balancer
Scorpion Roller Rockers
Chrome 7qt front sump oil pan
Some parts were bought slightly used, most are brand new. Engine has never been started. Should be a torque monster. I am sure I am missing a few things in the listing.
$4400 OBO
Third:
Transmission
Race Prepped C4
Reverse Manual Valve body
B&M Hammer shifter
3000-3500 TCI stall converter
Trans has a few passes on it...went 10.8X
Oversized trans pan
B&M trans cooler
Braided trans lines
Powdercoated (slightly scratched) bell housing
$750
Fourth:
Exhaust for 65-66 mustang with C4
Custom made 1 3/4" longtube headers, ceramic coated...brand new: ($700)
Dr Gas Xpipe...new, never welded
Hooker Aerochamber mufflers...new
set of GT style polished tailpipes
$600 for all...I paid over a grand for this and its all new
I think thats it for now. As you see, I have 4 "packages" for sale. Will NOT seperate any of the packages. Everything will go on Ebay in a few days. Giving you all first crack at it. Any questions, just let me know. Feel free to post on every board you can think of. I can send pics of some items. Engine is nearly done being built, hot rod front suspension is going in next weekend.
-Shane
First:
1966 mustang coupe Including:
No engine, no trans
cowl replaced ($700)
Great interior, including headliner, new door panels, and seats($400)
Dash pad removed and smoothed
Good glass - no windshield though
Rstyle Front Apron with removeable chin spoiler($200)
California Special decklid with moldedin end caps ($500)
New 4.5 leaf mid eye leafs ($200)
Cal-Trac Traction Bars ($350)
Edelbrock IAS shocks ($200)
Powdercoated trans mount($100)
Clean underside
Replaced floor pans($700)
Scotts Hot Rod Adjustable front suspension...coated silver ($2500) -see sourappleperf.com for explanation
Chromed Manual rack and pinion (no steering shaft)($350)
17x8" Chrome Bullets with Kumho 225/45 in front and Nitto 555R 245/45 in rear ($1500)
9" posi rear with 3.50 gear($500)
GT rear valance ($150)
Chrome rear bumper($150)
Large, Aluminum radiator...new($300)
Holley Blue pump and regulator($150)
New gas tank...powdercoated chrome($150)
Back half of car is primed
Doors are on, but need to be fitted
Fenders on, but need to be fitted, along with the rest of the front end (all grills, headlights, buckets, housings, etc included...just need a hood
Need motor mounts
I am sure that I am missing a few things. I have nearly 8500 invested, not including the car itself....
$5200 OBO
Second:
Engine
331 Stroker
Ross 9.1:1 compression pistons for TW heads
Hbeam rods
hawks racing crank
Block was bored and hot tanked and notched for stroker
DSS PRO girdle and windage tray
ARP bolts throughout
TW heads with upgraded springs
XE274HR camshaft
MSD Probillet Dist
Edelbrock RPM Intake (carb)
Powdercoated Timing cover
Noisy gear drive
Cobra valve covers
Misc gaskets
Engine balanced to 28oz
28oz SFI flexplate for C4 trans
New Harmonic Balancer
Scorpion Roller Rockers
Chrome 7qt front sump oil pan
Some parts were bought slightly used, most are brand new. Engine has never been started. Should be a torque monster. I am sure I am missing a few things in the listing.
$4400 OBO
Third:
Transmission
Race Prepped C4
Reverse Manual Valve body
B&M Hammer shifter
3000-3500 TCI stall converter
Trans has a few passes on it...went 10.8X
Oversized trans pan
B&M trans cooler
Braided trans lines
Powdercoated (slightly scratched) bell housing
$750
Fourth:
Exhaust for 65-66 mustang with C4
Custom made 1 3/4" longtube headers, ceramic coated...brand new: ($700)
Dr Gas Xpipe...new, never welded
Hooker Aerochamber mufflers...new
set of GT style polished tailpipes
$600 for all...I paid over a grand for this and its all new
I think thats it for now. As you see, I have 4 "packages" for sale. Will NOT seperate any of the packages. Everything will go on Ebay in a few days. Giving you all first crack at it. Any questions, just let me know. Feel free to post on every board you can think of. I can send pics of some items. Engine is nearly done being built, hot rod front suspension is going in next weekend.
-Shane