Shifter Question

[siaphysco]

hey guys i have bought a pro 5.0 about 4 months ago for my 01 GT...I dont kno if i installed it wrong or it is just the shifter, but it has a lot of play...i meeen a LOT..i usually kno that pro5.0 is one of the tightest shifters around....if you kno anything can u help me out

ThNx

 

[Roland69]

did you check to see if the nylon bushing in where the shaft ball goes in the tranny was on the end of your old shifter. Sounds like that bushing came out and your shifter is sloping around in there. has it been like this since you changed the shifter or did it start doing this later on.

 

[Nater]

did you check to see if the nylon bushing in where the shaft ball goes in the tranny was on the end of your old shifter. Sounds like that bushing came out and your shifter is sloping around in there. has it been like this since you changed the shifter or did it start doing this later on.

+1

 

[siaphysco]

it has been like that since i changed the shifter.....ill try putting the bushing on....thnx