• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Shifter question

  • Thread starter Thread starter Sparxx
  • Start date Start date Feb 3, 2009

Sparxx

Member
Feb 3, 2009
47
2
8
Feb 3, 2009
#1
  • Feb 3, 2009
  • #1
Hi guys recently picked up a '89 GT. 5.0, auto. The problem I'm having is that someone installed a B&M Hammer shifter and didn't finish hooking everything up. The Neutral Safety Switch isn't hooked up and the back up lights. The switchs on the shifter are there but no wires. I was told the wires for the stock shifter where in the center console already, I can't find them. Can anybody help me out? Location and wire colors would be helpful. Thanks
 

capri debris

Member
May 5, 2007
289
6
18
PA
Feb 3, 2009
#2
  • Feb 3, 2009
  • #2
You'll have to remove your driver side seat and pull the carpet back to access the wires. They come from the area below the radio and run under the carpet along the driver side of the tunnel and then through a grommet to the driver side of the tranny to a round clip that used to be plugged into the aod. You can see this grommet from the underside if you look for it. As for the colors of the wires, yours will be different from my year so I can't help you. I suggest getting a wire schematic for your year and it should be easy for you to get the switches wired up correctly.
 

Sparxx

Member
Feb 3, 2009
47
2
8
Feb 5, 2009
#3
  • Feb 5, 2009
  • #3
Remove center console and found the wires coming from the trans tunnel. They go to the mirror switch/ lighter and the others are wired to the light in the gear selector. Not sure that plug is correct. It has 4 wires going into it and two coming out. Its a oval shaped two prong plug. Any help??
 
You must log in or register to reply here.

Similar threads

C
Electrical Under dash wiring
  • ChicagoMustang
  • Apr 17, 2026
  • Fox 5.0 Mustang Tech
Replies
1
Views
212
Fox 5.0 Mustang Tech Apr 17, 2026
AeroCoupe
T
Electrical Brown Connector #31
  • ta66
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
210
Fox 5.0 Mustang Tech Jul 30, 2026
ta66
T
3
Hammer shifter problems
  • 387lx
  • Apr 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
262
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 11, 2026
General karthief
S
Fox '87 GT can't get to stay running
  • spilly
  • Mar 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 20, 2026
spilly
S
R
Engine Block Identification
  • Ranger302
  • Feb 22, 2025
  • Fox 5.0 Mustang Tech
Replies
1
Views
294
Fox 5.0 Mustang Tech Feb 22, 2025
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?