Fox Short block suggestions

90LXFOX · May 20, 2022

I’m looking to buy a shortblock so I don’t have to have my car down for long . Any suggestions on a good shortblock . Trying to build around 400- 450 horsepower. Will be using tfs 11r 170 or 190 heads and holly systemax intake and have Ed Curtis build me a cam.

hoopty5.0 · May 20, 2022

New or used?

90LXFOX · May 20, 2022

Mstng93SSP · May 20, 2022

My friend went with blueprint engines. It is a quality piece with a warranty.

hoopty5.0 · May 20, 2022

Blueprint engines, LMR sells shortblocks, sometimes you can find stuff on marketplace. Just depends on your budget.

Mustang5L5 · May 20, 2022

How many options are there these days for short blocks short of the high dollar blocks? Not many i imagine.

Even the suppy of good 302 cores is drying up. I almost feel like i need to snag an explorer engine and squirrel it away because I might not be able to get one in 10 years.

Mstng93SSP · May 20, 2022

I have 3 spares....wait, make that two after the implosion of the 306..

DemonGT · May 20, 2022

Mustang5L5 said:
How many options are there these days for short blocks short of the high dollar blocks? Not many i imagine.

Even the suppy of good 302 cores is drying up. I almost feel like i need to snag an explorer engine and squirrel it away because I might not be able to get one in 10 years.

Coyote swap

Mustang5L5 · May 20, 2022

DemonGT said:
Coyote swap

Definitely.

Already decided I’m going to keep an eye out for one.

90LXFOX · May 20, 2022

DemonGT said:
Coyote swap

I’m actually debating selling my fox and buy a 15-17 coyote mustang . Drove one the other day and had no idea how strong those cars are and super comfortable!!

mikestang63 · May 20, 2022

find an explorer or mountaineer shortblock and have it rebuilt how you want it, unless you want to go high dollar then go to Woody or Ed Curtis.

DemonGT · May 20, 2022

90LXFOX said:
I’m actually debating selling my fox and buy a 15-17 coyote mustang . Drove one the other day and had no idea how strong those cars are and super comfortable!!

Just bought a 2021 GT last August and when i drive it and feel the power it has it makes the fox look pretty bad, and its comfortable. I think about all the time and money i put into my fox and it cant even keep up with a stock GT.

7991LXnSHO · May 20, 2022

Mstng93SSP said:
My friend went with blueprint engines. It is a quality piece with a warranty.

I find that to be a Very scary idea, but QC has hopefully improved since 95.
That’s 1995, not 1895.

Mustang5L5 · May 20, 2022

DemonGT said:
Just bought a 2021 GT last August and when i drive it and feel the power it has it makes the fox look pretty bad, and its comfortable. I think about all the time and money i put into my fox and it cant even keep up with a stock GT.

I took a brand new ecoboost Mustang for a ride the other day. I was there for another vehicle but it was “unavailable” so I wanted to kill time.

For 305 HP, it’s no slouch. It would definitely leave a stock or lightly modded Fox behind.

But those 2.3s sound like poop.

96pushrod · May 21, 2022

I’d rock a blueprint short block for a budget piece. Their quality seems like it has gotten pretty good. Watch the video of their factory tour.

limp · May 21, 2022

nastyZ28 website has alot of complaints on it about blueprint SBC engines........

limp · May 21, 2022

When I first got my mustang project I expected to go to a ford dealer and purchase a new long block.... I was used to the Chevrolet " NEW " engine program from years back that was a deal..... Ford seems to have NOTHING like the Chevy program....

Mustang5L5 · May 21, 2022

limp said:
When I first got my mustang project I expected to go to a ford dealer and purchase a new long block.... I was used to the Chevrolet " NEW " engine program from years back that was a deal..... Ford seems to have NOTHING like the Chevy program....

The used to in the early 2000’s

Looking through my catalog, you could get everything from a “econo long block” from $2800 to $6000 high performance engines

I seem to remember new short blocks were around $1500

I’ve always found the reviews on Blueprint to be mixed. The factory five cobra replica guys love them. On here I’ve often found negative reviews. I have no experience with them, but they do seem to be one of the last remaining options short of buying an engine off Ed Curtis or one of the other big name shops around

Monkeybutt2000 · May 21, 2022

At that power level,I'm assuming stroker. Neutral balance,good heads and cam you'll have no problem reaching that power level.

96pushrod · May 21, 2022

limp said:
nastyZ28 website has alot of complaints on it about blueprint SBC engines........

What type of complaints? Anything with roller cam stuff?

Fox Short block suggestions

90LXFOX

Member

hoopty5.0

mechanicus terribilis

90LXFOX

Member

Mstng93SSP

You have a nice rear end there Dave.

hoopty5.0

mechanicus terribilis

Mustang5L5

That is…until I whipped out my Bissell

Mstng93SSP

You have a nice rear end there Dave.

DemonGT

Mustang5L5

That is…until I whipped out my Bissell

90LXFOX

Member

mikestang63

DemonGT

7991LXnSHO

wanna catch the space herp

Mustang5L5

That is…until I whipped out my Bissell

96pushrod

I think they're a little easier to get off

limp

wrap a little cheese around it and its a done

limp

wrap a little cheese around it and its a done

Mustang5L5

That is…until I whipped out my Bissell

Monkeybutt2000

Mustang Master

96pushrod

I think they're a little easier to get off

Similar threads

Fox Short block suggestions

Member

mechanicus terribilis

Member

You have a nice rear end there Dave.

mechanicus terribilis

That is…until I whipped out my Bissell

You have a nice rear end there Dave.

That is…until I whipped out my Bissell

Member

wanna catch the space herp

That is…until I whipped out my Bissell

I think they're a little easier to get off

wrap a little cheese around it and its a done

wrap a little cheese around it and its a done

That is…until I whipped out my Bissell

Mustang Master

I think they're a little easier to get off

Similar threads

Privacy & Transparency

Privacy & Transparency