side exhaut and 20 inch bullits

black02gt-t · Aug 8, 2004

I am gonna change out my flowmasters AT catback exhaust for a side exhaust. But i don't want the roush style with the square exit pipe. Does any one know where i can buy the side exhaust with the cobra r style dual tip eXhaust out the side? And also i am seriously looking at buying some 20 inch bullit rims like the one in MM&FF mag but cant find a place to buy,em. It says A.R.E made them but i can't find there website. Does any know where i can buy these rims at?

If i cant get the 20 inh bullits i'll probably get some 20 inch SSR's

kboy262 · Aug 8, 2004

Spintech has the side exhaust kit and I believe for an extra $80 you can get the Cobra R tips. With the tips it cost somewhere around $500. It is still cheaper than Borla or the Steeda kit. Also it sounds good with a o/r H-pipe.

kboy262 · Aug 8, 2004

Also I believe those wheels were custom built if I remember correctly.

black02gt-t · Aug 8, 2004

thanks for the info on the exhaust, i might add a prochamber to it instead of a h pipe but i'am not sure as i aas goona go with a prochamber for my flows.

And yes the rims were custom made but i was pretty sure they were mass produced i'll just keep looking.

kboy262 · Aug 8, 2004

Good luck with the search. Those wheels did look Bad A.. with that suspension stance.

04DarkShadowGT · Aug 8, 2004

Stay with some 18X10 and 18X9 wheels and dont add the extra weight of 20's

ImportEater98 · Aug 8, 2004

i say leave the 20's for Escalades, and run some nice 17's. You don't own a civic afterall. Whats next? APC stickers? lol

ReVeRsE · Aug 8, 2004

My homeboy got a white GT with 20 inch deep dish bullits and roush body kit with side exhaust. If i can ill post pictures if i can get ahold of him.

1999limitedGT · Aug 8, 2004

I usually dont like anything bigger than 18's-19's on stangs, but that blue bullitt with those 20'' deep dish bullitt wheels was

That extra weight is definitely gonna hurt your performance though...

wms004 · Aug 8, 2004

black02gt-t said:
I am gonna change out my flowmasters AT catback exhaust for a side exhaust. But i don't want the roush style with the square exit pipe. Does any one know where i can buy the side exhaust with the cobra r style dual tip eXhaust out the side? And also i am seriously looking at buying some 20 inch bullit rims like the one in MM&FF mag but cant find a place to buy,em. It says A.R.E made them but i can't find there website. Does any know where i can buy these rims at?

If i cant get the 20 inh bullits i'll probably get some 20 inch SSR's

where are you located? if you are close i'll take your old catback

black02gt-t · Aug 8, 2004

WMS004 I am in san diego and u can have the AT catback for 350 but u will have to wait until December as I am on deployment right now. I also like the 18x9 FR500 black rims with the chrome lip but I wish they made them in 19’s I just think 18;s would be too small for my car. And reverse go ahead and post those pics if u can. And where did your friend buy his bullits

wms004 · Aug 8, 2004

black02gt-t said:
WMS004 I am in san diego and u can have the AT catback for 350 but u will have to wait until December as I am on deployment right now. I also like the 18x9 FR500 black rims with the chrome lip but I wish they made them in 19’s I just think 18;s would be too small for my car. And reverse go ahead and post those pics if u can. And where did your friend buy his bullits

Get the black FR500's. I can barely hook up with 18's.. any less tire and it'd be much worse. They do look cool tho http://www.mustangweekly.com/2002/october/stray_bullitt/sbullitt-1.ASP

NightLife · Aug 8, 2004

wms004 said:
Get the black FR500's. I can barely hook up with 18's.. any less tire and it'd be much worse. They do look cool tho http://www.mustangweekly.com/2002/october/stray_bullitt/sbullitt-1.ASP

... so how are those guys who are running 15" wheels hooking up?....

get 17's or 18's at the most... 20's are for wiggers and rappers

Jackie Chan · Aug 8, 2004

i was thinking about getting some old western style covered wagon wheels(30"s) and putting them on the stang. chrome of course

huesmann · Aug 8, 2004

kboy262 said:
Spintech has the side exhaust kit and I believe for an extra $80 you can get the Cobra R tips. With the tips it cost somewhere around $500. It is still cheaper than Borla or the Steeda kit. Also it sounds good with a o/r H-pipe.

The Spintech side exhaust is cheaper because it doesn't include side skirts. The Borla kit does (dunno about Steeda). The Spintech exits just sit under your existing rocker covers. Up to you whether that's enough clearance to the road or not.

BigHairyMonkey · Aug 8, 2004

Beau · Aug 8, 2004

that car looks great but the wheels still look too big.

1999limitedGT · Aug 8, 2004

NightLife said:
20's are for wiggers and rappers

Wow, "wiggers'' ?? Im asuming that stands for white ******s?? Correct me if Im wrong... Anyways a little FYI, "black people" and rappers are not the only people that buy anything larger than 20's...

V_Eight · Aug 8, 2004

Those look a ton like American Racing Torq Thrust 2's painted with charcoal paint.

Lapse138 · Aug 8, 2004

It's All about the Spintech, baby!

side exhaut and 20 inch bullits

black02gt-t

New Member

kboy262

Active Member

kboy262

Active Member

black02gt-t

New Member

kboy262

Active Member

04DarkShadowGT

Member

ImportEater98

New Member

ReVeRsE

New Member

1999limitedGT

wms004

black02gt-t

New Member

wms004

NightLife

Member

Jackie Chan

I didn't read this.

huesmann

BigHairyMonkey

Beau

1999limitedGT

V_Eight

Lapse138

New Member

Attachments

Similar threads

side exhaut and 20 inch bullits

New Member

Active Member

Active Member

New Member

Active Member

Member

New Member

New Member

New Member

Member

I didn't read this.

New Member

Attachments

Similar threads

Privacy & Transparency

Privacy & Transparency