• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 V6 Mustang Tech

Side vs Back

  • Thread starter Thread starter Tenchu8669
  • Start date Start date Jan 19, 2004
  • 1
  • 2
Next
1 of 2 Next Last
T

Tenchu8669

New Member
Oct 24, 2003
8
0
0
Tampa,Fl
Jan 19, 2004
#1
  • Jan 19, 2004
  • #1
I'm going to be getting true duels soon and was wondering what looks better? side or getting a gt bumper and have them come out the back? is there a differance in the gains? and how fast are the 80-87 5.0s compared to me(2000 stang)
 

01slashstang

Founding Member
Mar 24, 2002
243
0
0
NOVA
Jan 19, 2004
#2
  • Jan 19, 2004
  • #2
I personally am getting the spin tech side exhaust. I didnt want to get a GT bumper and get it painted...etc. I do like the magnaflow dual rear exhaust setup.

Gains depend on the setup as well as the system you get. ie....quasi or true duals..quasi just hooks up to your y pipe..you will get better gains from a true dual setup than a quasi setup. maybe 12-15 HP gain.

Your stang should be able the "hang" with some of the older Gt's...but dont bite off more than you can chew! some have pretty good torque numbers..


cheers!
 
Z

zoopa_man

New Member
Jul 13, 2003
92
0
0
Rochester,NY
Jan 19, 2004
#3
  • Jan 19, 2004
  • #3
I got GT take off's for my stang. I have kept my stock v6 bumper and just had the shop shim the rear hangers for the tail pipes so they hang down just a little lower to clear the rear bumper. I'll be getting a GT bumper later on when money permits. But for the mean time I was able to get away with just the exhaust and didn't have to worry about a rear bumper.

Exhaust tone wise the GT takeoffs are mildly mannered. Not very loud at all. And haven’t got much of a grumble to them at idle. But they are definitely an improvement over the wimpy stock setup. People will notice it when you get on the gas but don't expect to turn heads and have people say "Oh my god!" either.

From what i've read about side exhaust setups the only two negative points were.
1) You won't be able to put on sub frame connectors because the exhaust pipes will be in the way. This is only an issue if you plan on getting sub frames to stiffen up the chasi of the car.
2) You don't get as much of a HP gain from the side exit exhaust as you do with a straight out the back design. Don't know so much about this one as I really didn't feel any seat of the pants difference with the duals I got. So who knows, were only talking minimal HP gains to begin with. So don't let this be the deciding factor, but a point to be made none the less.

My best advice would be to listen to lots of sound clips and then pick the exhaust that sounds best to you. In the end your the one that has to look at it and listen to it every day. So pick something you like.
 

97v6Silver

it came to $4.56 and i got $0.44 change from a 5,
Apr 22, 2003
843
0
0
VA Beach
Jan 20, 2004
#4
  • Jan 20, 2004
  • #4
sides only look good if you have side skirts with the holes in them or they look stupid poking out there, and i think sides are more stylish, and give a better sound then rears, but you will pay dearly for these few advantages...
 
0

03CrazyStang

New Member
Aug 28, 2003
132
0
0
Texas
Jan 20, 2004
#5
  • Jan 20, 2004
  • #5
Side exhaust is freaken awesome...especially the cobra r side exhaust tips
 

decoy562

New Member
Oct 9, 2003
1,526
0
0
Acworth, GA
Jan 21, 2004
#6
  • Jan 21, 2004
  • #6
You could get a magnaflow catback system for $300 from www.fulllineexhaust.com and get a GT bumper. It'll look like this...

 
0

03CrazyStang

New Member
Aug 28, 2003
132
0
0
Texas
Jan 21, 2004
#7
  • Jan 21, 2004
  • #7
Decoy... how much does the GT bumper usually run?
 

97v6Silver

it came to $4.56 and i got $0.44 change from a 5,
Apr 22, 2003
843
0
0
VA Beach
Jan 21, 2004
#8
  • Jan 21, 2004
  • #8
oooo you trader!
 
T

Tenchu8669

New Member
Oct 24, 2003
8
0
0
Tampa,Fl
Jan 21, 2004
#9
  • Jan 21, 2004
  • #9
went to the shop today and the guy said the 99+'s can't have sides pipes only the rear is this tru ?or a pile of bs?
 

Krusher

New Member
Nov 14, 2003
46
0
0
Hampton, VA
Jan 21, 2004
#10
  • Jan 21, 2004
  • #10
bs... any GOOD shop (make sure you understand the caps on GOOD) can do anything. If you really wanted to you could buy the $150 dual side exhaust off of JC Whitney and bolt that up.

CDC makes the best IMO looking side exhaust (~$1000)
Spintech makes a very nice setup too (~$500)
 

dastang2

Active Member
Dec 11, 2003
2,020
0
46
tx
Jan 22, 2004
#11
  • Jan 22, 2004
  • #11
someone that is an 01 v6 nut researches on these sort of things daily and he told me that in order to put side pipes on you will need to reroute some wiring away from the side exit pipes
 

01slashstang

Founding Member
Mar 24, 2002
243
0
0
NOVA
Jan 22, 2004
#12
  • Jan 22, 2004
  • #12
someone that is an 01 v6 nut researches on these sort of things daily and he told me that in order to put side pipes on you will need to reroute some wiring away from the side exit pipes

------------------------------------------------------

I have not heard this before. The only thing I ever heard was some shops wont put duals (rear bumper) on a V6 because of the brake lines (in the way). There are quite a few V6ers out there with duals hopefully they will chime in regarding this.

Like I said , Im gonna install the spintech side exhaust. I know of another V6er who had this done with no problems...

Cheers!
 

decoy562

New Member
Oct 9, 2003
1,526
0
0
Acworth, GA
Jan 22, 2004
#13
  • Jan 22, 2004
  • #13
03CrazyStang said:
Decoy... how much does the GT bumper usually run?
Click to expand...

I don't know...my car is a GT, so it came with that bumper
 

ganador01

Founding Member
Jan 21, 2002
1,581
2
38
Dallas/Fort Worth, Texas
Jan 22, 2004
#14
  • Jan 22, 2004
  • #14
01slashstang said:
someone that is an 01 v6 nut researches on these sort of things daily and he told me that in order to put side pipes on you will need to reroute some wiring away from the side exit pipes

------------------------------------------------------

I have not heard this before. The only thing I ever heard was some shops wont put duals (rear bumper) on a V6 because of the brake lines (in the way). There are quite a few V6ers out there with duals hopefully they will chime in regarding this.

Like I said , Im gonna install the spintech side exhaust. I know of another V6er who had this done with no problems...

Cheers!
Click to expand...

That is true... the exhaust will bounce off the lines if not placed perfectly...but i doubt many shops will throw away business unless they either just don't like u or are already packed to the limit...
 

ganador01

Founding Member
Jan 21, 2002
1,581
2
38
Dallas/Fort Worth, Texas
Jan 22, 2004
#15
  • Jan 22, 2004
  • #15
Btw, there is only one way to go...

Built in rear bumper exhaust!
 

98CobraClone

New Member
Feb 28, 2003
592
0
0
Ripley, Ohio
Jan 24, 2004
#16
  • Jan 24, 2004
  • #16
ganador01 said:
Btw, there is only one way to go...

Built in rear bumper exhaust!
Click to expand...

I beg to differ.......I'm now quite partial to the side exhaust, aside from the big sound difference that has shifted towards the front of the car.
 

decoy562

New Member
Oct 9, 2003
1,526
0
0
Acworth, GA
Jan 28, 2004
#17
  • Jan 28, 2004
  • #17
Here's a place where you can order a factory GT bumper replacement...

GT Bumper

Hope this helps
 
S

SteveB

New Member
Dec 13, 2002
25
0
0
Jan 28, 2004
#18
  • Jan 28, 2004
  • #18
Hello All,
I would like your opinion. I was thinking about the true dual exhaust with a slight variation. I was thinking about the exits on the side, but behind the rear wheels. Not directly but angled down and out. With about 2 inches of chrome showing. I know it would be a little different from the standard rear and side exits. Any just a thought.

Steve
 
0

03CrazyStang

New Member
Aug 28, 2003
132
0
0
Texas
Jan 28, 2004
#19
  • Jan 28, 2004
  • #19
SteveB said:
Hello All,
I would like your opinion. I was thinking about the true dual exhaust with a slight variation. I was thinking about the exits on the side, but behind the rear wheels. Not directly but angled down and out. With about 2 inches of chrome showing. I know it would be a little different from the standard rear and side exits. Any just a thought.

Steve
Click to expand...

i was thinkin the same thing...anyone with pics please post..
 

'66 coupe

Founding Member
Aug 7, 2000
1,202
9
59
Lakeland, Fl.
Jan 28, 2004
#20
  • Jan 28, 2004
  • #20
97v6Silver said:
sides only look good if you have side skirts with the holes in them or they look stupid poking out there,
Click to expand...

All the while, the Cobra R owners are laughing their asses off at the Pre-99 V6 owner that thinks their cars look stupid.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

P
Hello, core supports for '86 vs '90-3, i need some answers if anyone knows
  • Pony Dr.Mike
  • Mar 14, 2026
  • The Welcome Wagon
Replies
7
Views
290
The Welcome Wagon Mar 15, 2026
95steedamustang
G
Fox Tire Size for 16" Pony Wheels on 1984 LX Convertible
  • gw7
  • Jun 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
89
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 24, 2026
Mustang5L5
6
2010 V6 Sees differently than GT?
  • 6t9Mach1
  • Mar 31, 2026
  • 2010 - 2014 Specific Tech
Replies
2
Views
179
2010 - 2014 Specific Tech Apr 1, 2026
6t9Mach1
6
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
799
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
L
Is catback worth it over axle backs?
  • Lorencarson
  • May 15, 2025
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
2
Views
680
2005 - 2014 S-197 Mustang -General/Talk- May 15, 2025
89ripper
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 V6 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?