sigh.... when i thought it was over...

webslinger67 · Apr 21, 2007

I took my 90 GT to a local mechanic here, James West Auto to be exact..... they put in my fuel pump.....

now its leaking gas everywhere..... so, i know where to get the lock ring and seal for the sending unit/fuel pump and the local dealer has the filler neck seal....

but, of course, when they did the work, i told them to not rip the filler neck boot that bolts to the body... so what did they do... they ripped the filler neck boot.....

does anyone know where i can get one, other than the junk yard? i would like a new one

i already tried 5.0 Resto.... unless i was looking in the wrong spot, they dont have one...

and just think, i was loving this car again, now, i gotta hate on a mechanic to do this crap again and i know they are going to give me sh_t about more labor

86bluecobra · Apr 21, 2007

I would take it back to them and make them fix it no charge if it is there fault.

webslinger67 · Apr 21, 2007

oh i am, i just wanna make sure they got the right parts....

i dont want my old parts half a__ed in there...

cevtv · Apr 22, 2007

If this is what you mean, 50resto has them....

http://www.latemodelrestoration.com/iwwida.pvx?;item?item_no=LRS-9072A 1&comp=LRS

webslinger67 · Apr 22, 2007

no, i mean the booth that bolts to the body around the upper portion of the filler neck, the one everyone seems to rip when they pull the tank out , they bend the neck so far that it rips it.

stangjunkie · Apr 23, 2007

i got mine for 11-12 bucks at ford dealer

webslinger67 · Apr 23, 2007

unless you are the magic man, and you need to play the lottery , you couldnt have, its a discontinued part.... for about 10 years now

RoadKill96 · Apr 23, 2007

junk yard is a good start for your part

webslinger67 · Apr 23, 2007

that would be the best place, if they didnt stack the cars with the gas tank sitting on some wheels.... sigh.....

webslinger67 · May 3, 2007

its baaaaack!!!

ok, seen as how that JW Auto didnt put the seal on right and it leaks gas everwhere....

not only that, now when i make a right sweeping turn , i loose fuel pressure , what the heck is that about

i have decided to do this myself.... just as my daddy taught me "if you want it done right, do it yourself"

so i am looking for a thread with a how to install the fuel pump and sending unit in a fuel tank on a 90 Mustang GT

i am particularly looking for how the pickup screen is suppose to sit in relation to the tank or fuel pump.... i was not happy getting on the highway the other day, with a half a tank of gas, and i lost fuel pressure on the on ramp then when i straightened out, it came back..

i got a feeling they bent my sending unit to, and i maybe near and empty tank

so i ordered a Fuel pump and Sending unit install kit from 50 resto and doing it myself...

anything else i need to know?

thanks for all your help

88mouse · May 3, 2007

shouldn't mattter whitch way you put the sock on the pump.

webslinger67 · May 10, 2007

ok, i know you are all curious as to what has been happening..

with my poor 90.....

well, i will let you tell me if there is something wrong in these pictures....

now , this has all to do with the mechanic not putting the seal in right on the fuel pick up.... then i had problems with fluctuating fuel pressures...

webslinger67 · May 10, 2007

wait...

there is more...

and if you guess whats wrong.... you get a prize.....

the rest of what is wrong with the fuel tank that the mechanic fracked up..

86bluecobra · May 10, 2007

I would have taken it back to them. Actually I would put it back together now and take it back to them. Let them discover your now bent fuel pump.

Flavadave4 · May 10, 2007

86bluecobra said:
I would have taken it back to them. Actually I would put it back together now and take it back to them. Let them discover your now bent fuel pump.

Good piece of advice right there

webslinger67 · May 10, 2007

oh, i am not taking it back to them, i am taking them to the BBB , and possibly to small claims if i have to..... i will give them a chance to buy me new parts and get the tank baffel welded again, but i am doing it all myself..... if they cant do it right once, what makes you think they can do it right again....

screw that and screw them..... THERE IS NOT ONE MECHANIC IN VEGAS, THEY ARE ALL HACKS..

jerryD · May 10, 2007

maybe it got bent when the installer didn't put the pump sock on correctly to line up with the factory baffle. he tried to push the assembly into the tank, wouldn't go all the way to sit flush on the tank, so he just muscled it into place.

webslinger67 · May 10, 2007

still a hack...

he tried to weld the pickup back in place....

oh, by the way, does anyone know how i tell if this is the pump i bought for them to put in? i cant find any numbers on it

jerryD · May 10, 2007

i dunno what color pumps are these days, but the ones ive seen are silver in color or natural metal color. not gold like the one in the pic. also they normally have walbro on them, and a big W stamped on it. i also remember number were on it, one would be like GSS240 or something. the number would translate into what pump it was like 255, or 255 high pressure, or 190, ect....

webslinger67 · May 11, 2007

sigh...

well, here is what happened, when putting in the new Walbro pump... they broke it, so they got a stock Carter pump and put that in there..... without telling me....

the owner was ver apolagetic and is refunding me my labor and buying me a new Walbro pump.....

the pick up i already have and i am having the tank baffle welded at a radiator shop.....

so , the car is down for at least another week....

sigh.... when i thought it was over...

Member

Advanced Member

Member

Member

New Member

Member

New Member

Member

Member

New Member

Member

Attachments

Member

Attachments

Advanced Member

Active Member

Member

Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency