SLP OR X pipe Install Question

AMustang2004

New Member
Jun 3, 2005
2
0
0
This is not my first post I just cannot find my user information. I am installing my SLP OR X pipe and I have hit a snag. I cannot remove the studs from the exhaust manafold on the driver's side. Can anyone help? How do I get them off?
 
The drivers side should be a breeze compared to the passenger side. I used a swivel, few extensions, 15mm deep socket, and a can of PB Blaster. Let the PB blaster sit for a minute or 2, and wrench away. Should be easy after the PB Blaster soaks in.
 
Stang|ess said:
The drivers side should be a breeze compared to the passenger side. I used a swivel, few extensions, 15mm deep socket, and a can of PB Blaster. Let the PB blaster sit for a minute or 2, and wrench away. Should be easy after the PB Blaster soaks in.

I am not talking about the nuts. Those are off. I am talking about the studs that need to be taken off the driver's side only.
 
wait, the studs should be in the header/manifold right? you should only have to remove the nuts on both passenger and driver side and it should be free from the engine. just lots of penetrating oil, a foot or so of extension and a swivil will make your life easier. just take your time and use some harsh language at it and youll be fine.
 
RedBullitt said:
wait, the studs should be in the header/manifold right? you should only have to remove the nuts on both passenger and driver side and it should be free from the engine. just lots of penetrating oil, a foot or so of extension and a swivil will make your life easier. just take your time and use some harsh language at it and youll be fine.

Yeah the studs are in the manifold and yes you do have to take them out on the driver's side. I realize you have a Bassani and I know you don't have to take them out for that installation but you do for SLP. The supplied bolts are 13 mm rather than the 15 mm nuts that are stock on the Mustang.

Since I could not get an answer on here I went to Sears and bought a stud puller and it worked great. After that the install was a snap. The drivers side oxygen sensor was a little short but a little yelling at it helped. I love the sound it is so loud but if my car was a daily driver I don't think I would have going with the OR pipe.