• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

SLP OR X pipe Install Question

  • Thread starter Thread starter AMustang2004
  • Start date Start date Jun 3, 2005
A

AMustang2004

New Member
Jun 3, 2005
2
0
0
Jun 3, 2005
#1
  • Jun 3, 2005
  • #1
This is not my first post I just cannot find my user information. I am installing my SLP OR X pipe and I have hit a snag. I cannot remove the studs from the exhaust manafold on the driver's side. Can anyone help? How do I get them off?
 

Stang|ess

seeking cyber partner(s)
Oct 18, 2003
941
0
37
Hawaii
Jun 3, 2005
#2
  • Jun 3, 2005
  • #2
The drivers side should be a breeze compared to the passenger side. I used a swivel, few extensions, 15mm deep socket, and a can of PB Blaster. Let the PB blaster sit for a minute or 2, and wrench away. Should be easy after the PB Blaster soaks in.
 
A

AMustang2004

New Member
Jun 3, 2005
2
0
0
Jun 3, 2005
#3
  • Jun 3, 2005
  • #3
Stang|ess said:
The drivers side should be a breeze compared to the passenger side. I used a swivel, few extensions, 15mm deep socket, and a can of PB Blaster. Let the PB blaster sit for a minute or 2, and wrench away. Should be easy after the PB Blaster soaks in.
Click to expand...

I am not talking about the nuts. Those are off. I am talking about the studs that need to be taken off the driver's side only.
 

Stang|ess

seeking cyber partner(s)
Oct 18, 2003
941
0
37
Hawaii
Jun 3, 2005
#4
  • Jun 3, 2005
  • #4
You shouldnt have to remove the studs.
 

RedBullitt

New Member
Jul 7, 2004
462
0
0
Morgantown WV
Jun 4, 2005
#5
  • Jun 4, 2005
  • #5
wait, the studs should be in the header/manifold right? you should only have to remove the nuts on both passenger and driver side and it should be free from the engine. just lots of penetrating oil, a foot or so of extension and a swivil will make your life easier. just take your time and use some harsh language at it and youll be fine.
 

Z28 KILR

Founding Member
Aug 4, 2001
386
0
0
Columbus, OH
Jun 6, 2005
#6
  • Jun 6, 2005
  • #6
RedBullitt said:
wait, the studs should be in the header/manifold right? you should only have to remove the nuts on both passenger and driver side and it should be free from the engine. just lots of penetrating oil, a foot or so of extension and a swivil will make your life easier. just take your time and use some harsh language at it and youll be fine.
Click to expand...

Yeah the studs are in the manifold and yes you do have to take them out on the driver's side. I realize you have a Bassani and I know you don't have to take them out for that installation but you do for SLP. The supplied bolts are 13 mm rather than the 15 mm nuts that are stock on the Mustang.

Since I could not get an answer on here I went to Sears and bought a stud puller and it worked great. After that the install was a snap. The drivers side oxygen sensor was a little short but a little yelling at it helped. I love the sound it is so loud but if my car was a daily driver I don't think I would have going with the OR pipe.
 
You must log in or register to reply here.

Similar threads

A
A/F ratio gauge install questions.
  • AngryH58
  • Sep 24, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
237
1996 - 2004 SN95 Mustang -General/Talk- Oct 22, 2026
Noobz347
Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
611
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
R
bbk shorty header to mid pipe gasket
  • randyyy
  • Sep 29, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
500
1996 - 2004 SN95 Mustang -General/Talk- Sep 29, 2025
randyyy
R
M
Help! 2003 GT misfire when hot
  • Modular03
  • Feb 10, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
613
SN95 4.6L Mustang Tech Feb 13, 2026
Mustang5L5
4
Drivetrain Wilwood Clutch and Brake Pedal Combo Installation - Help
  • 427stang
  • Jul 8, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
124
Fox 5.0 Mustang Tech Jul 8, 2026
427stang
4
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?