smog pump eliminator

Farmers SN95

Member

Jun 2, 2006

76

0

6

Ky

Sep 19, 2006

#1

• Sep 19, 2006

• #1

I have a UPR smog pump eliminator and I have about 13,000 on it,
But now the bearing is going out.

So what kind of smog pump eliminator do you have?

 

S

slow50sally

New Member

Apr 28, 2006

66

0

0

Hawaii

Sep 19, 2006

#2

• Sep 19, 2006

• #2

No eliminator just run a shorter belt

 

Dagz

New Member

Dec 2, 2005

173

0

0

Quesnel Canada

Sep 19, 2006

#3

• Sep 19, 2006

• #3

No kit just running a shorter belt with AC could get the lenth if you need it no troubles at all. Plus I'm cheap so whatever works!

 

SeventyMach1

Keep it lubed .... keep it straight .... and keep

Mar 30, 2005

1,940

3

36

North Carolina

Sep 20, 2006

#4

• Sep 20, 2006

• #4

I run the one that Summit sells. Nice quality. No problems yet.

 

vp6799

New Member

Aug 15, 2006

124

0

0

Massachusetts

Sep 20, 2006

#5

• Sep 20, 2006

• #5

For the guys that run a shorter belt. Do you know what size to get?? What pieces have to be removed?? Is it just the pump and the piping that goes with it, what if any has to be blocked?


Thanks
Vic

 

94GTStang

Founding Member

Oct 26, 2001

1,631

0

36

Oklahoma City

Sep 20, 2006

#6

• Sep 20, 2006

• #6

I've had an ASP pulley for about 5 years now without any problems.

 

SeventyMach1

Keep it lubed .... keep it straight .... and keep

Mar 30, 2005

1,940

3

36

North Carolina

Sep 20, 2006

#7

• Sep 20, 2006

• #7

vp6799 said:

For the guys that run a shorter belt. Do you know what size to get?? What pieces have to be removed?? Is it just the pump and the piping that goes with it, what if any has to be blocked?


Thanks
Vic

Click to expand...

I don't run a short belt .... but maybe this will help you ......

SMOG REMOVAL

BELT DIAGRAMS

 

NotQuik

Founding Member

Oct 21, 2000

5,158

29

88

Central Florida

Sep 20, 2006

#8

• Sep 20, 2006

• #8

I have the ebay special....suprisingly still in one piece and it's quiet.

 

D

DaveB

Founding Member

Jul 13, 2002

637

0

0

Middlesex and Pomona, NJ

Sep 21, 2006

#9

• Sep 21, 2006

• #9

ASP. Been on 4 years without a problem.

 

Dagz

New Member

Dec 2, 2005

173

0

0

Quesnel Canada

Sep 23, 2006

#10

• Sep 23, 2006

• #10

VP6799 take off the pump and lines, all I did to block the heads was take the stock piece that bolts up, cut the tube with a hack saw as close as you can get it then flip them over, and switch sides so the backs are now facing the heads, and run a little silicon on them and tighten it back up. belt lenth is 90''. Part number 5060900

That is with ac and no pullies. Hope that answers some questions

dagz

 

9

93GTWannabe

Member

May 11, 2006

81

0

7

Norfolk/Houston

Sep 23, 2006

#11

• Sep 23, 2006

• #11

I'm just running a shorter belt. I deleted my AC and my Smog pump, MY belt size is 82". as for the associated equipment with the Smog pump, you can put a bolt in the back nof the heads to block it off, and you'll need a blockoff plate for the exhuast. I haven't actually removed my smog pump yet. I'm doing that after Deployment when i pull the motor and tranny in favor of the new ****.

 

vp6799

New Member

Aug 15, 2006

124

0

0

Massachusetts

Sep 23, 2006

#12

• Sep 23, 2006

• #12

Dagz said:

VP6799 take off the pump and lines, all I did to block the heads was take the stock piece that bolts up, cut the tube with a hack saw as close as you can get it then flip them over, and switch sides so the backs are now facing the heads, and run a little silicon on them and tighten it back up. belt lenth is 90''. Part number 5060900

That is with ac and no pullies. Hope that answers some questions

dagz

Click to expand...

Awesome, thanks for the info. I'll try that this weekend.

Vic