SN Pedals in a Fox

I

IN2FORD

New Member

Mar 31, 2005

19

0

1

Aug 28, 2011

#1

• Aug 28, 2011

• #1

I am wanting to put in a set of SN95 Mach 1 pedals in my 90 Fox with a 93 Cobra brake booster. I know I will have to change the mounts but I am concerned about the brake plunger. Seems from what I have read at some point the rod went from straight to curved but I can't seem to confirm. Any ideas??

Barry

 

Chrome_Rust

Member

Dec 5, 2008

530

1

17

Findlay, Ohio

Aug 28, 2011

#2

• Aug 28, 2011

• #2

I have 01 Gt pedals in my car. But I upgraded to a 95 V6 mastercylinder and booster. It can be done, just use the right parts. I'd swap the booster over also...

 

I

IN2FORD

New Member

Mar 31, 2005

19

0

1

Aug 29, 2011

#3

• Aug 29, 2011

• #3

ok so use an SN booster with SN pedals right?

Barry

 

2000xp8

SN Certified Technician

Aug 8, 2003

8,016

1,613

194

NJ

Aug 29, 2011

#4

• Aug 29, 2011

• #4

Somewhere on modularfords.com in the modular conversions section there is an entire write up on intalling the newer pedals.
It's fairly recent so you won't have to look through too many pages.

 

I

IN2FORD

New Member

Mar 31, 2005

19

0

1

Aug 29, 2011

#5

• Aug 29, 2011

• #5

2000xp8 said:

Somewhere on modularfords.com in the modular conversions section there is an entire write up on intalling the newer pedals.
It's fairly recent so you won't have to look through too many pages.

Click to expand...

I found that article and it tells me what I need to do to make it mount up to the column. But it delt more with hydroboost and I am going to stay with a booster. I am going to try to hit a junkyard tomorrow. I think he has a 6 cylinder 2000 mustang so maybe I can rob the parts from it. Thanks for all of the info!

Barry

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,222

17,909

224

Massachusetts

Aug 30, 2011

#6

• Aug 30, 2011

• #6

Are you wanting to do this for the pedal covers only?

If so, you don't need to swap all the pedals. The gas pedal and dead pedal bolt up to the fox parts already. You can just swap the entire clutch arm over to the fox pedal, and you can get the pedal pad onto the stock brake pedal with a little lubrication.

 

I

IN2FORD

New Member

Mar 31, 2005

19

0

1

Aug 30, 2011

#7

• Aug 30, 2011

• #7

Mustang5L5 said:

Are you wanting to do this for the pedal covers only?

If so, you don't need to swap all the pedals. The gas pedal and dead pedal bolt up to the fox parts already. You can just swap the entire clutch arm over to the fox pedal, and you can get the pedal pad onto the stock brake pedal with a little lubrication.

Click to expand...

I am wanting to do it for pedal spacing. The SN pedals are further apart. Seems like when I have a foot on the clutch and one on the brake they run into each other. On the SN pedals the clutch and brake pedal is further apart.

Barry

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,222

17,909

224

Massachusetts

Aug 30, 2011

#8

• Aug 30, 2011

• #8

You can try just swapping the clutch pedal only over to the fox setup. The spacing may be in the bends of the arms vs the actual pedal assembly. Compare them side by side

 

I

IN2FORD

New Member

Mar 31, 2005

19

0

1

Aug 30, 2011

#9

• Aug 30, 2011

• #9

I will definitely do that. Thanks for the heads up!

Barry

 

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"

15 Year Member

Nov 29, 1999

14,679

424

154

Boca Raton, Florida

Aug 31, 2011

#10

• Aug 31, 2011

• #10

Just looked up the Mach 1 pedal set up. Wow, is that nice. I'd consider doing this. Post pics when your done, I'd like to see how it came out and what was involved.

 

I

IN2FORD

New Member

Mar 31, 2005

19

0

1

Aug 31, 2011

#11

• Aug 31, 2011

• #11

Will do

Barry

 

beyondspexj

Member

Oct 30, 2009

265

0

17

Las Vegas

Sep 1, 2011

#12

• Sep 1, 2011

• #12

interested in this as well.