So if the mid-pipe doesnt't come with the tube for smog...

[Tom95gt]

which I'm pretty sure the dr.gas x-pipe doesn't, what do you do about the smog tube? I'm not sure if I want to delete the smog pump because of emissions but then again I don't think it will because of the long tubes. I don't think they did visual check 2 years ago but who knows? So back to the point can I just plug the end of the smog tube with something or should I just delete or what?

 

[drakesdad]

My summit H came with one....I've seen some people just clamp it off......you can always drill and tap one in and create the tubing to tie into.....depends on how much you want it.......

 

[The O.G.]

most seem to come with one but still arent a perfect fit by any means

iv just plugged or just left it but ,they can be noisy from air

 

[HISSIN50]

Yep, they often have a bung. If not, I would not plug the line from the smog pump if your pump is going to continue to be spun. It does build decent pressure. I'd plug the end of it to keep crap out. Then undo the rubber line at the TAB (since it's up relatively high). That way the pump can vent to atmosphere. If it was me, I'd also put a breather on the end of the line to keep crap out of the line. If water backfeeds into the pump, the bearings and bushings in the pump can corrode. Then the pump is junk.

Good luck.