• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-

SOMEONE BACKED INTO MY '07 GT/CS HELP!

  • Thread starter Thread starter pilatti1
  • Start date Start date Oct 28, 2009

pilatti1

New Member
Mar 1, 2009
7
0
2
Connecticut
Oct 28, 2009
#1
  • Oct 28, 2009
  • #1
Some dumb minivan driving woman backed into the driversdie front 1/4 panel on Monday , There is a small dent (very small) right above the GT/CS stripe but it then pushed out above at the very top of th the fender well. A body shop thinks Dent Wizard could fix both issues which then there would be no painting required, any thoughts? Another body shop wanted top replace the 1/4 panel paint the panel & blend the hood & door, so i am confused on which route to take. HELP!!
 

Ken04

New Member
May 24, 2007
235
0
0
Vancouver Washington
Oct 28, 2009
#2
  • Oct 28, 2009
  • #2
pilatti1 said:
Some dumb minivan driving woman backed into the driversdie front 1/4 panel on Monday , There is a small dent (very small) right above the GT/CS stripe but it then pushed out above at the very top of th the fender well. A body shop thinks Dent Wizard could fix both issues which then there would be no painting required, any thoughts? Another body shop wanted top replace the 1/4 panel paint the panel & blend the hood & door, so i am confused on which route to take. HELP!!
Click to expand...


well TRY the painless dent guy, if it doesn't work you'll have to take more extreme measures. If you have a crease in the panel the dent removal won't get it out.
 
1

1965coupe

Member
Jan 1, 2004
32
1
19
Temecula, CA
Oct 28, 2009
#3
  • Oct 28, 2009
  • #3
Definitely go with the paintless dent removal before going thr bodyshop route.. I have used this method before on a variety of dents and it works amazingly well..

If anything, it will look better than going the re-paint route... which, in a lot of cases, is usually quite obvious, depending on the color..
 

stang_ed

New Member
Aug 5, 2009
20
0
1
Oct 28, 2009
#4
  • Oct 28, 2009
  • #4
I had about 400 miles on my 2009 black GT when someone parallel parking in the space behind my car dented in the left rear quarter panel and left side of the bumper. The best body shop around my area suggested I go to the shop that does all their paintless dent removals. Cost $225 to get the dent taken out of the quarter panel, nothing they could do to help the bumper. The result of the repair on the quarter panel is very good, you only see it if you know it was there. My suggestion is to go to a shop with a reputation for good work.
 

Mark25

Member
Jul 30, 2006
93
0
6
Virginia Beach, VA
Oct 29, 2009
#5
  • Oct 29, 2009
  • #5
I've used the same PDR guy for the past 12 years with outstanding results (he's even removed very shallow dents on my new cars either from the car carrier or just sitting on the lot to be sold)...a good PDR guy can make dents disappear like magic. My guy can also remove dents from the plastic facias and rear end bumper (provided the paint is not ruined)...
Oh, and I had a very small dent at the top of my A-pillar (at first we thought it might have been a paint flaw from the factory)...he removed that one by pulling (using a glue gun). He did try to get at it by removing my passenger weatherstripping and interior trim...but there was no way he could get a tool in behind it...so with some special glue he attached a very small plunger and popped it out and then he tapped it down and it's completely gone. I am a true believer in PDR! I wish they had PDR a long time ago.
For those who live in the Hampton Roads VA area the PDR specialist I use is:
http://dentsexpressva.com/
You won't be disappointed.

pillatti1, BTW I'm originally from Middletown, CT.
 
You must log in or register to reply here.

Similar threads

5
Hello fellow Mustang fanatics.
  • 580HP*428Cj
  • Apr 2, 2026
  • The Welcome Wagon
Replies
2
Views
191
The Welcome Wagon Apr 2, 2026
General karthief
M
2001 v6 heater return pipe leak question
  • mnky99
  • Nov 11, 2025
  • SN95 V6 Mustang Tech
Replies
1
Views
247
SN95 V6 Mustang Tech Nov 11, 2025
mnky99
M
W
Help with 95 GT
  • waynewl34
  • Apr 5, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
295
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 5, 2025
Noobz347
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
552
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
S
Upgrade Advice on an 89 GT Convertible NJ
  • SteakDad
  • Apr 17, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
867
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 18, 2025
limp
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?