• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

something broke

  • Thread starter Thread starter deadlast
  • Start date Start date Jul 20, 2005

deadlast

New Member
Mar 30, 2005
495
0
0
Belmont, MA
Jul 20, 2005
#1
  • Jul 20, 2005
  • #1
well my fat ass friend (no longer allowed in my car) was using the top of the window to help him get out. it popped off the plastic triangle where the mach speakers would be, and pulled the entire window inwards about 2 inches at the top, popping it out from the vertical rubber guide it sits in where the mirror is. i got the window back in place, but it will go down noisely about 3" then stop, then when i put it back up, there is a 2-3 millimeter gap from the back of the window, to the rear window, so when its up i can slide 3-4 pieces of paper through, when normally it sits another inch back. it went down once all the way, but it made alot of crunching and popping noises, and shifted front to back. is something broken inside or did it fall of the track? hes willing to payfor it either if i go to the shop or if i do it myself, so i wanna see if i can get some free money. help please.
 

mytight95

Active Member
Apr 11, 2003
2,605
0
46
Dothan,Al
Jul 20, 2005
#2
  • Jul 20, 2005
  • #2
deadlast said:
well my fat ass friend (no longer allowed in my car) was using the top of the window to help him get out. it popped off the plastic triangle where the mach speakers would be, and pulled the entire window inwards about 2 inches at the top, popping it out from the vertical rubber guide it sits in where the mirror is. i got the window back in place, but it will go down noisely about 3" then stop, then when i put it back up, there is a 2-3 millimeter gap from the back of the window, to the rear window, so when its up i can slide 3-4 pieces of paper through, when normally it sits another inch back. it went down once all the way, but it made alot of crunching and popping noises, and shifted front to back. is something broken inside or did it fall of the track? hes willing to payfor it either if i go to the shop or if i do it myself, so i wanna see if i can get some free money. help please.
Click to expand...


friend huh.........? Real friendly of you, anyhow:



just take the door panel off and see if you can see anything by letting the window up and down little at a time..... it may have broken the rabs on the window that guide it... i replace some of mine when i did the motor rebuild for the power window....


jason
 

sociopath5.0

New Member
Jul 7, 2004
155
0
0
somewhere near Louisville, KY
Jul 20, 2005
#3
  • Jul 20, 2005
  • #3
Sounds like he may have broken your regulator.
 

deadlast

New Member
Mar 30, 2005
495
0
0
Belmont, MA
Jul 20, 2005
#4
  • Jul 20, 2005
  • #4
ok hes not really a friend, but a friend of a friend who was in the car.. but thats beside the point. how do i go about removing the door panal with out breaking anything more?
 

mytight95

Active Member
Apr 11, 2003
2,605
0
46
Dothan,Al
Jul 20, 2005
#5
  • Jul 20, 2005
  • #5
remove the door cup, remove the screws behind it, holding the door panel to the door, remove the push pin located on the side of the speaker cover.... pull door panel up, and then out...... it should come out, then you will have to remove a couple harness' etc...



jason
 

donkey_punch

New Member
Jan 16, 2004
565
0
0
northern****ingjersey
Jul 20, 2005
#6
  • Jul 20, 2005
  • #6
mytight95 said:
friend huh.........? Real friendly of you,
jason
Click to expand...


your right on the money jason.



and a Chilton Manual can tell you everything you need to know to pull the door panel off. it even gives you pictures.
its worth it's weight in gold.
 

urban96

bubb rubb says:"woo woooooo"
Founding Member
Sep 24, 2002
3,464
1
69
Syracuse, NY
Jul 20, 2005
#7
  • Jul 20, 2005
  • #7
i think he broke your heads, your gonna need some aluminum ones
 

deadlast

New Member
Mar 30, 2005
495
0
0
Belmont, MA
Jul 20, 2005
#8
  • Jul 20, 2005
  • #8
ok thanks for the help
 
You must log in or register to reply here.

Similar threads

S
Need help 94 GT convertible top leaking
  • Scott94gtvert
  • Aug 9, 2025
  • 1994 - 1995 Specific Tech
Replies
1
Views
233
1994 - 1995 Specific Tech Aug 9, 2025
General karthief
Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
37
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 18, 2026
AeroCoupe
S
Rust under side window weatherstrip
  • swe13
  • Jun 5, 2025
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
0
Views
188
2005 - 2014 S-197 Mustang -General/Talk- Jun 5, 2025
swe13
S
S
1965 Mustang with 80s 5.0 engine in it Power Steering hose or connection ID?
  • spearce
  • May 19, 2026
  • Classic Mustang Specific Tech
Replies
2
Views
212
Classic Mustang Specific Tech Jun 8, 2026
AeroCoupe
M
1996 GT Speedometer electrical nightmare
  • moon96gt
  • Oct 7, 2026
  • SN95 4.6L Mustang Tech
Replies
2
Views
164
SN95 4.6L Mustang Tech Oct 17, 2026
CAMTWO1070
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?