Sound deadening in a weird place

O

OxMox

turkeysammichesonhisface

Mar 31, 2005

0

0

0

Palm Harbor, FL

Apr 1, 2005

#1

• Apr 1, 2005

• #1

Ok, i've installed a new steeda tri-ax shifter in re-place of my old one that came on the car when I bought it, now that it's installed it's much louder than before (more road noise) I thought that I installed it wrong or whatever but no it's all good. So my questions are... What the hell!? and can or should I use some dynamat, roadkill, or any other type of sound deadening inside the center console and shifter area to help with this problem?

 

98stangv8

Active Member

Oct 3, 2003

1,036

0

36

fayetteville, nc

Apr 1, 2005

#2

• Apr 1, 2005

• #2

worked v6 said:

Ok, i've installed a new steeda tri-ax shifter in re-place of my old one that came on the car when I bought it, now that it's installed it's much louder than before (more road noise) I thought that I installed it wrong or whatever but no it's all good. So my questions are... What the hell!? and can or should I use some dynamat, roadkill, or any other type of sound deadening inside the center console and shifter area to help with this problem?

Click to expand...

I put some inside my shift boot, and around it...but it doesn't do that much...you still have the flexible part of the boot that you can't attach dynamat to..and that will transmit the noise...

bottom line....wear earplugs...turn up the stereo...or just drive at WOT so you won't hear it..

 

MyEarsHurt

New Member

May 21, 2004

918

0

0

Apr 1, 2005

#3

• Apr 1, 2005

• #3

I know it sounds nuts, but I have actually seen people remove their whole tranny and dynamat the whole thing, all sides...although thats a lot of dynamat for a seemingly small annoyance.

 

reeber

10 Year Member

Mar 10, 2004

574

26

38

Berlin, NJ

Apr 1, 2005

#4

• Apr 1, 2005

• #4

The secret to reducing trans noise is to get electrical tape, remove the shift boot. Get a nice piece of foam and wrap the foam very tightly around the shifter. Then, while the boot is still off, cut a small hole in the remaining foam. Place in over the shifter and spread it throughout the whole opening in the floor. Should be noticeably quiet after that.

 

O

OxMox

turkeysammichesonhisface

Mar 31, 2005

0

0

0

Palm Harbor, FL

Apr 4, 2005

#5

• Apr 4, 2005

• #5

reeber said:

The secret to reducing trans noise is to get electrical tape, remove the shift boot. Get a nice piece of foam and wrap the foam very tightly around the shifter. Then, while the boot is still off, cut a small hole in the remaining foam. Place in over the shifter and spread it throughout the whole opening in the floor. Should be noticeably quiet after that.

Click to expand...

Sounds like that may work. Do you have any more detailed instructions or is that basically it? If you could go into detail a little more PM me or just post it. Thanks.

 

Curse

Member

Apr 8, 2004

791

2

16

El Paso, TX

Apr 4, 2005

#6

• Apr 4, 2005

• #6

Good idea reeber, may have to try that.

 

alanw6

Member

Dec 19, 2002

449

0

16

memphis, TN

Apr 4, 2005

#7

• Apr 4, 2005

• #7

www.cobrabob.com

Someone's done the hard work already for those who choose not to DIY.

 

O

OxMox

turkeysammichesonhisface

Mar 31, 2005

0

0

0

Palm Harbor, FL

Apr 5, 2005

#8

• Apr 5, 2005

• #8

alanw6 said:

www.cobrabob.com

Someone's done the hard work already for those who choose not to DIY.

Click to expand...

I have that shifter gasket and apparently it doesn't work very well. And yes it's installed right.

 

C

crash22

New Member

Sep 18, 2003

65

0

0

Plam Bay, FL

Apr 5, 2005

#9

• Apr 5, 2005

• #9

good idea rebeer or you can use some liquid dynamat it comes in a spray can. you can get it wereever they sell the dynamat if not let me know i'll give u a link.