Spark Plug Failure Killed my Engine

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
I pulled this plug from my 2.3, but wanted to know if anyone else has had a similar issue with Autolite plugs, regardless of motor. :shrug:

I had recently changed the plugs, and about 3 days later the motor started running rough. Turns out I was getting 0 compression in #4. :nono:

The missing piece of the plug must have done some damage :mad: :nonono: :mad:

I have yet to pull the head, so I don't know what damage was done.

jason


 
not very common but it happens. That piece can fall off either from being to weak or being bent to many times. The copper core also falls out once they are in a car for too long. Your head is messed up?:shrug:
 
Yeah sorry bout the poor pic.

My plug reading skills are still developing, but signs of being hot would include white blisters, correct?

There was absolutely no blistering on the plug.

Coolant temps on this motor are always very low.

When installing the plugs, I did not need to change the gap. I don't think I bent the tip excessively.

I think I just got a bad plug.

Thanks for the comments guys. Any other thoughts?