• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

speed density

  • Thread starter Thread starter pony gt
  • Start date Start date Mar 18, 2006
P

pony gt

New Member
Mar 17, 2006
21
0
0
Mar 18, 2006
#1
  • Mar 18, 2006
  • #1
i just recently bought an 87 gt, it has pro topline heads with 2.1 " intake valves and 1.6" exhaust valves and a .560 lift cam in it.
it still has speed density and idles up and down 300-500 rpm and occasionally stalls when i push in the clutch. is there any way i can fix the idle problem without converting it to mass air or is that about my inly option.
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Mar 18, 2006
#2
  • Mar 18, 2006
  • #2
You didn't say much about the cam profile but if it idles at all then I doubt that the cam is your problem. You need tostart looking around your engine bay and up under the dash for old, broken, cracked, and rotting vaccum lines. A spray can of starting fluid sparingly misted around the engine bay can help with this. Surging idle in not usually an indication of cam/list problems. Vac leaks, are.
 
P

pony gt

New Member
Mar 17, 2006
21
0
0
Mar 18, 2006
#3
  • Mar 18, 2006
  • #3
i have already sprayed carb & choke cleaner over the engine looking for an intake leak or vacuum leaks and so far found nothing. the guy i bought it from said he thought it was cuz of o2 sensors but i thought it might be the computer, not being able to work with that cam and head set up
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Mar 18, 2006
#4
  • Mar 18, 2006
  • #4
pony gt said:
the guy i bought it from said he thought it was cuz of o2 sensors but i thought it might be the computer, not being able to work with that cam and head set up
Click to expand...

Surging idle symptoms are not indicitave of a problem with cam and heads. If you weren't getting enough vac from your cam (providing that was the only problem) you'd idel either high or low and your fuel maps would be off across the board.
 
P

pony gt

New Member
Mar 17, 2006
21
0
0
Mar 19, 2006
#5
  • Mar 19, 2006
  • #5
well for now i turned my idle up to about 1000 and it runs smooter it doesnt surge near as much but i cant find a vac leak worth a damn!!!
oh and this is way off topic but i OWNED a z 28 today, i spanked it sooo bad he quit by middle of second
 

troyGT03

New Member
Feb 22, 2004
278
0
0
too close to memphis,tn
Mar 19, 2006
#6
  • Mar 19, 2006
  • #6
what is the duration specs for the cam? your lift is rather large for sd but not a problem. get a vacuum reading at idle. sd is based on engine vacuum for fuel tables.
 
P

pony gt

New Member
Mar 17, 2006
21
0
0
Mar 20, 2006
#7
  • Mar 20, 2006
  • #7
well i just bought the car and am still waiting for a list of all the specs of everything put on. as for the vac reading i will try to find out.
 
P

pony gt

New Member
Mar 17, 2006
21
0
0
Mar 20, 2006
#8
  • Mar 20, 2006
  • #8
i just bought the car and am waiting on a list of everything out on it. as for the vac i have to find a gauge....
 
P

pony gt

New Member
Mar 17, 2006
21
0
0
Mar 20, 2006
#9
  • Mar 20, 2006
  • #9
i am still waiting for a list of all the specs from the previous owner he told me most of them but i forgot. as for the vac i need to find a gauge .....
 
You must log in or register to reply here.

Similar threads

A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
598
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
2001 SVT Cobra slow return to idle speed
  • phil2001svt
  • Oct 21, 2026
  • SVT Tech Forum
Replies
3
Views
164
SVT Tech Forum Nov 2, 2026
phil2001svt
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
914
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
619
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
F
Resolved Stumble issue upon acceleration (1987 GT)
  • FoxDude87
  • Sep 16, 2024
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
54
Views
4K
Fox 5.0 Mustang Tech Dec 3, 2024
FastDriver
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?