• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

speed sensor - speedo cable

  • Thread starter Thread starter NFGTragedy
  • Start date Start date Jul 9, 2006
N

NFGTragedy

New Member
Oct 19, 2004
155
0
0
Rochester, NY
Jul 9, 2006
#1
  • Jul 9, 2006
  • #1
Mine is currently missing and I see that 50resto sells the cable with and without the sensor... so is it needed? I have the wire down by my tranny that would accept it but I don't have the sensor. Any ideas?

The sensor is mounted near the transmission on the speedo cable. It mounts around where the gear is clipped to the cable.
 

ninety15.0

New Member
Mar 10, 2004
1,336
0
0
Jul 9, 2006
#2
  • Jul 9, 2006
  • #2
well the cable is completely seperate from the vehicle speed sensor....the part that plugs into the speed sensor is only for the back up lights. If you dont mind not having back up lights then it would be a problem. But your saying that you have the speed sensor you just dont have the plug on the car to go into it correct? by the way did that bumpsteer kit make a decent difference? how bout the X2 ball joints? thanks man
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jul 9, 2006
#3
  • Jul 9, 2006
  • #3
They also might be showing the part for 94-95's, which have a little converter (the speedo is electric). As I recall, there's a speedo gear and then the little box that converts the signal.

Good luck.
 

bill302

Active Member
Nov 2, 2005
2,131
1
46
alabama,gadsden
Jul 9, 2006
#4
  • Jul 9, 2006
  • #4
HISSIN50 said:
They also might be showing the part for 94-95's, which have a little converter (the speedo is electric). As I recall, there's a speedo gear and then the little box that converts the signal.

Good luck.
Click to expand...
you recall correctly HISSIN50 i pulled my guage cluster on my 95 out last week and no cable just wires....
 
N

NFGTragedy

New Member
Oct 19, 2004
155
0
0
Rochester, NY
Jul 9, 2006
#5
  • Jul 9, 2006
  • #5
ninety15.0 said:
well the cable is completely seperate from the vehicle speed sensor....the part that plugs into the speed sensor is only for the back up lights. If you dont mind not having back up lights then it would be a problem. But your saying that you have the speed sensor you just dont have the plug on the car to go into it correct? by the way did that bumpsteer kit make a decent difference? how bout the X2 ball joints? thanks man
Click to expand...

Actually my ford electric & vacuum troubleshooting guide says that the plug that goes to the tranny for the neutral lock out actually includes the reverse lights. The sensor which I am referring to is... 1983-1993 Speed Sensor -- This is the sensor that tells the PCM the speed of the transmission output shaft. Your speedometer driven gear attaches to this.
 

GearHd6

Member
Jul 19, 2005
459
0
18
Ashford, CT
Jul 9, 2006
#6
  • Jul 9, 2006
  • #6
Yeah mine has the sensor your talkin about. The sensor goes into the tranny first which has the gear on it and then the cable hooks to that. I think that speed sensor is telling the computer some valuable information but I could be wrong. If you've got the plug down there then i'd get the sensor.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jul 9, 2006
#7
  • Jul 9, 2006
  • #7
The speed sensor has two functions:
1.) On cruse control equipped cars, it feeds the cruse control amp to help hold a steady speed.
2.) Some cars use the cruse control sensor (VSS sensor) to tell the computer when the car is slowing to a stop. The computer uses this information to temporarly increase the idle speed to prevent stalling.

Speedometer cable replacement for 87-93 Mustangs.

Note: All 89-93 cars have a VSS sensor even if they do not have cruse control. The 87-88 only have a VSS sensor if the have cruse control.

Speedo cable housing assembly without cruse control:


Speedo cable housing assembly with cruse control
 
You must log in or register to reply here.

Similar threads

L
Electrical problems with passenger side downstream o2 sensor
  • Lexiii12
  • Sep 14, 2026
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
0
Views
162
2005 - 2014 S-197 Mustang -General/Talk- Sep 14, 2026
Lexiii12
L
Removing speedo cable from the VSS
  • 91AOD5.0LX
  • Mar 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 25, 2026
91AOD5.0LX
S
  • Locked
Drivetrain Adjustable clutch cable questions
  • Scott_S
  • Oct 31, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
561
Fox 5.0 Mustang Tech Oct 31, 2025
Noobz347
A
P0036 P0056 P0137 P0157 2020 Ford Mustang GT
  • AmkoA
  • Jun 16, 2026
  • 2024+ (S650) Mustang -General/Talk
Replies
0
Views
291
2024+ (S650) Mustang -General/Talk Jun 16, 2026
AmkoA
A
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
497
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?