speed sensor - speedo cable

NFGTragedy

New Member
Oct 19, 2004
155
0
0
Rochester, NY
Mine is currently missing and I see that 50resto sells the cable with and without the sensor... so is it needed? I have the wire down by my tranny that would accept it but I don't have the sensor. Any ideas?

The sensor is mounted near the transmission on the speedo cable. It mounts around where the gear is clipped to the cable.
 
well the cable is completely seperate from the vehicle speed sensor....the part that plugs into the speed sensor is only for the back up lights. If you dont mind not having back up lights then it would be a problem. But your saying that you have the speed sensor you just dont have the plug on the car to go into it correct? by the way did that bumpsteer kit make a decent difference? how bout the X2 ball joints? thanks man
 
They also might be showing the part for 94-95's, which have a little converter (the speedo is electric). As I recall, there's a speedo gear and then the little box that converts the signal.

Good luck.
 
HISSIN50 said:
They also might be showing the part for 94-95's, which have a little converter (the speedo is electric). As I recall, there's a speedo gear and then the little box that converts the signal.

Good luck.
you recall correctly HISSIN50 i pulled my guage cluster on my 95 out last week and no cable just wires....
 
ninety15.0 said:
well the cable is completely seperate from the vehicle speed sensor....the part that plugs into the speed sensor is only for the back up lights. If you dont mind not having back up lights then it would be a problem. But your saying that you have the speed sensor you just dont have the plug on the car to go into it correct? by the way did that bumpsteer kit make a decent difference? how bout the X2 ball joints? thanks man

Actually my ford electric & vacuum troubleshooting guide says that the plug that goes to the tranny for the neutral lock out actually includes the reverse lights. The sensor which I am referring to is... 1983-1993 Speed Sensor -- This is the sensor that tells the PCM the speed of the transmission output shaft. Your speedometer driven gear attaches to this.
 
Yeah mine has the sensor your talkin about. The sensor goes into the tranny first which has the gear on it and then the cable hooks to that. I think that speed sensor is telling the computer some valuable information but I could be wrong. If you've got the plug down there then i'd get the sensor.
 
The speed sensor has two functions:
1.) On cruse control equipped cars, it feeds the cruse control amp to help hold a steady speed.
2.) Some cars use the cruse control sensor (VSS sensor) to tell the computer when the car is slowing to a stop. The computer uses this information to temporarly increase the idle speed to prevent stalling.

Speedometer cable replacement for 87-93 Mustangs.

Note: All 89-93 cars have a VSS sensor even if they do not have cruse control. The 87-88 only have a VSS sensor if the have cruse control.

Speedo cable housing assembly without cruse control:
s08.jpg


Speedo cable housing assembly with cruse control
s09.jpg