Speedo Calibration in a 96 with 4.10's??

[Ready4this96]

Tomorrow I'm getting 4.10's put in my car and was wondering what I have to do to get the speedo calibrated CORRECTLY, I've been told so many different things. I just want to get this cleared up.

Tyler

 

[billyfe390]

Tomorrow I'm getting 4.10's put in my car and was wondering what I have to do to get the speedo calibrated CORRECTLY, I've been told so many different things. I just want to get this cleared up.

Tyler

You will have to get a speed cal. I ordered mine from partshopper here 99 bucks.

 

[Ready4this96]

So I cant use those speedo gears. I thought only the 99+ had electronic speedometers.

 

[RysRed96GT]

the pre99's had a gear that was used to run the speedo. only the 99+'s need the speedcal. when you order gears, most sites should have a table on which size speedo-gear you'll need for the rear end ratio

 

[85MustGT]

You can put in a 23 tooth gear however you will be off a few miles per hour, in addition because they have so many teeth they do not last that long.

However if you only have 15 bucks it is a nice way to go until you get your speed cal.

 

[98AtlanBluGT]

you should get the 6 tooth drive gear and the black 20 tooth speedo gear. the drive gear goes for about $8 at the dealership.

 

[Graham052]

get a speedcal, I got mine from dallas mustang, works great, and adjustable for gears and tire sizes