Speedo Calibration

[1Slow5.Ohh]

Just jerked out the stock 2.73's from my 94 automatic and beefed it up with a 3.73. Anyone know what speedo gear I need to make it right?

 

[urban96]

http://secure.50resto.com/product1.cfm?SID=1&Product_ID=571


just seen theres not one listed for 3.73's you could go with the one for 3.55 and be slightly off i guess

 

[1Slow5.Ohh]

Yea I checked that out that is the problem i've been having... Thanks anyways. Anyone else???

 

[urban96]

theres always this http://secure.50resto.com/product1.cfm?SID=1&Product_ID=361

 

[1Slow5.Ohh]

For 5-speed cars only.... It says...

 

[urban96]

http://www.dallasmustang.com/index.mvc?p=9910

 

[1Slow5.Ohh]

Seems like the best bet.... A little pricey... would rather put that $$ somewhere else...

 

[urban96]

yeah if you watch classifides you might be able to pick one up for about 1/2

 

[mytight95]

use the speedo calibration chart at www.hanlonmotorsports.com i think they have one for an auto as well..


jason

 

[95StallionGT]

I have a 95 Auto w/ 4.10's and I used a White Speddo Gear (think its a 23 tooth).
It is supposed to take care of 3.73's and up. Put my 4.10's right on, only about 3MPH off, so it should also put yours very close.

 

[94-302-vert]

3MPH at what speed though?

I broke down and did the brothers spped cal. I ahve read nightmares of people going through the wrong speedo gears like nothing. So for $80 ($5 off and free shipping when I bought) I went electronic. Works great so far.

Chris

 

[GRGT1994]

3MPH at what speed though?

I broke down and did the brothers spped cal. I ahve read nightmares of people going through the wrong speedo gears like nothing. So for $80 ($5 off and free shipping when I bought) I went electronic. Works great so far.

Chris

50Resto told me that the speed cal did not work for '94 and '95 Mustangs. They said it was only good for '96 and up.

So is there a difference between the speed cal that you got, and where did you get it?

Anyone else have experience with speed cal on one of our cars?

 

[94-302-vert]

http://www.brothersperformance.com/shop/mustang/brospeedcal.html

Install took under an hour and I am usually double the time everyone says it took them as I go slow and make sure everything is done right. This was EXTREMELY easy.

Chris

 

[1Slow5.Ohh]

All the electronic calibrators say for 5 speed cars only... I ordered the 23 tooth this morning so we'll see how is goes when it gets here...