Speedo gear question.
- Thread starter King Cobra 22
- Start date
AznStanger3v
Active Member
$20 at the ford dealership. dont PAY to get it installed, do it YOURSELF. Ill tell you how to do it:
1. Jack up the drivers side
2. Look towards the TAIL end of the tranny and find a harnass plugged into a transistor
3. use a 12mm open end wrench and take off the ONE bolt holding it in
4. pull the transistor out(im assuming you unplugged the harnass)
5. take off the black little piece holding on the stock speedo gear
6. put the new one on and secure it with the black piece
7. put it back in the tranny. bolt it back up. plug in. and the fun part
8. TEST DRIVE....even though you did no performance mod, its an excuse to get nasty with it
1. Jack up the drivers side
2. Look towards the TAIL end of the tranny and find a harnass plugged into a transistor
3. use a 12mm open end wrench and take off the ONE bolt holding it in
4. pull the transistor out(im assuming you unplugged the harnass)
5. take off the black little piece holding on the stock speedo gear
6. put the new one on and secure it with the black piece
7. put it back in the tranny. bolt it back up. plug in. and the fun part
8. TEST DRIVE....even though you did no performance mod, its an excuse to get nasty with it
JJ95GTID
Active Member
Steeda sells it for $15 and change. I have seen them on ebay for like $8. Do it yourself with the apove instructions. POC.
jermy82
Founding Member
I've actually heard Ford only has up to a 21 tooth, not the 23. Just order it from steeda for $15, and install is a breeze.
viperos
New Member
you can get a generic brand for like $10... and just install it yourself... very simple to do, it took my friend litterally 1 minute the other day... after he got it up on his lift...
Similar threads
