• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Speedo wrong?

  • Thread starter Thread starter MyCARneedsHelp
  • Start date Start date Jan 12, 2004

MyCARneedsHelp

Founding Member
Apr 24, 2002
658
0
16
Plainfield,IL
Jan 12, 2004
#1
  • Jan 12, 2004
  • #1
Ok so im driving down a busy street and everyone is passing me. I called my gf and had her follow me and im going slower then what my speedo is telling me

So if my speedo says im going 40 im accually going about 32-35mph anyone know what is involved with this so i could look at it? im guessing my speedo cable? Thanx for the help
 

TRWXXA

Member
Jan 18, 2003
190
1
19
RIGHT BEHIND YOU!!!... Made you look.
Jan 12, 2004
#2
  • Jan 12, 2004
  • #2
Have you swapped rearend gears? Changed your tire size?

Sounds like you may need to go up 1 or 2 teeth on your speedo gear if you have.
 

rmeyer_63

New Member
Nov 9, 2003
7
0
0
Santa Rosa, CA
Jan 12, 2004
#3
  • Jan 12, 2004
  • #3
5-speed or AOD? Rear end ratio? Sounds like you need a new speedo gear. Mustangs unlimited sells them.
 

larrendeuce

Member
Sep 13, 2003
649
1
19
Southern NJ
Jan 13, 2004
#4
  • Jan 13, 2004
  • #4
yeah mine is like 5mph off too, still has stock gears. Gets really bad when its cold, reads like 60 when I'm doing 40
 

MyCARneedsHelp

Founding Member
Apr 24, 2002
658
0
16
Plainfield,IL
Jan 13, 2004
#5
  • Jan 13, 2004
  • #5
im not sure what size gear is in the back. it is bout to fall off though makes many noises and sounds like gears and slippin, im gettin a new one soon hopfully. Think this may fix my problem?
 

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Jan 13, 2004
#6
  • Jan 13, 2004
  • #6
I just changed gears 2.73's--3.73's.when 60 my speedo says 85.theres a cable that goes into the tranny,pull it out and theres a little gear on the end.First you have to find out you rear end gear ratio, you have and put the correct gear on the end of the cable.Depends if you got a 5speed or aod to find the correct little gear you need.
 

MyCARneedsHelp

Founding Member
Apr 24, 2002
658
0
16
Plainfield,IL
Jan 13, 2004
#7
  • Jan 13, 2004
  • #7
its an AOD, but when im buy the rear end its coming with a 3:73 gear
 

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Jan 13, 2004
#8
  • Jan 13, 2004
  • #8
I just got the last gear in stock from Summitt,but they got it from TCI.I have an aod also,its the 23 toothed gear!! There easy to find.Call up tci or theres alot of different places you can get one.19.00 bucks !!
 

bobbyd

New Member
Sep 8, 2004
312
0
0
San Antonio/Los Angeles
May 15, 2007
#9
  • May 15, 2007
  • #9
hey guys im having the same problem i was probably going 60 or a little more and my speedo was saying that i was going 80 i have a 93 lx i dont know what kind of gears it has really its a AOD with a shifter so which speedo gear will I need? how can i check what gears I have?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
May 16, 2007
#10
  • May 16, 2007
  • #10
bobbyd said:
hey guys im having the same problem i was probably going 60 or a little more and my speedo was saying that i was going 80 i have a 93 lx i dont know what kind of gears it has really its a AOD with a shifter so which speedo gear will I need? how can i check what gears I have?
Click to expand...

Jack the rear of the car up on jackstands and place the transmission in neutral. Make a paint mark on the rear part of the driveshaft that is visible from the side of the car. Make a mark on the tire, and rotate it one turn while counting the number of turns the driveshaft makes.

less than 3 turns of the driveshaft = 2.73:1
about 3 turns and a little more = 3.08:1
a little more than 3 1/2 turns = 3.55:1
almost 3 3/4 turns of the driveshaft = 3.73:1
a little more than 4 turns of the driveshaft = 4.10:1

See http://www.geocities.com/mgnedell/notchback/tech/speedo.html for information on speedo drive gears.

see http://www.corral.net/tech/gearcalc.html for a calculator that uses RPM, rear end ratio and tire size to calculate speed
 

TRWXXA

Member
Jan 18, 2003
190
1
19
RIGHT BEHIND YOU!!!... Made you look.
May 16, 2007
#11
  • May 16, 2007
  • #11
The best way is to mark the driveshaft, turn the rear wheels 10 times, count the number times the driveshaft rotates, then divide that number by 10.

When you turn the wheels only once, it's hard to tell the difference between 3.08 turns of the driveshaft and 3.27 turns (or 3.55 turns and 3.73 turns, etc.). I know this for a fact. I thought I was getting a 3.08 rear end and really wound up with a 3.27 (even better). Only after I took off the differential cover and counted the pionion and ring gera teeth did I discover the error.
 

bobbyd

New Member
Sep 8, 2004
312
0
0
San Antonio/Los Angeles
May 16, 2007
#12
  • May 16, 2007
  • #12
thanks im gonna try both of those methods. I know the car stock has 2.73s since thats what it says on the door. I just dont know if the previous owner put gears on it (i would think he did) since the car has a shifter. thanks again guys
 
You must log in or register to reply here.

Similar threads

W
Speedometer and shifting issues
  • wyatt-tetro891
  • Aug 17, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
321
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 18, 2026
wyatt-tetro891
W
Removing speedo cable from the VSS
  • 91AOD5.0LX
  • Mar 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 25, 2026
91AOD5.0LX
T
Electrical Brown Connector #31
  • ta66
  • Jul 26, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
220
Fox 5.0 Mustang Tech Jul 30, 2026
ta66
T
0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Oct 7, 2026
2v_johnny
2
N
Vibration after new clutch
  • nipple_looker
  • Sep 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
744
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 26, 2026
fasterthangas
F
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?