• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

spider web and dog bones any problems?

  • Thread starter Thread starter mikemustang289
  • Start date Start date May 10, 2006
M

mikemustang289

Member
Jan 12, 2006
224
0
16
mesa, az
May 10, 2006
#1
  • May 10, 2006
  • #1
this is my first time assembling a roller motor. I put the roller lifters in, put the dogbones into the spider, Up facing up, and set it down, bolted it and it looks good.

I'm wondering if there is any adjustment or bending recommended? my dogbones dont sit flush against lifter bores, what I mean is the spider web seems to lift them up just a little be.

These things move around and slide all over the place? How is it one of these dogbones doesn't get wedged on top of the lifter during operation?

It just seems like a stupid design that's not very accurate, am I not seeing something here?

Why couldn't ford have attached the dogbones directly to the spider web and made this one entire piece?
 
S

stroked8e5

New Member
Jun 18, 2005
28
0
0
May 10, 2006
#2
  • May 10, 2006
  • #2
Sorry if i'm misunderstanding this "I put the roller lifters in, put the dogbones into the spider, Up facing up, and set it down, bolted it and it looks good". The dogbones don't get put into the spider. Lifters all go in,then all the dogbones get set onto the lifters with nipples up and then the spider gets bolted down with each "leg" of the spider pushing down on top of the dogbones. Hope that made sense.
 
M

mikemustang289

Member
Jan 12, 2006
224
0
16
mesa, az
May 10, 2006
#3
  • May 10, 2006
  • #3
Well that makes a lot more sense, thanks for letting me know, I could have had some problems. I didn't take the motor apart so I had no idea.

I put the dogbones in the middle of the spider, I knew it didn't seem right. Thanks!
 
J

jaybquick

New Member
Dec 4, 2004
27
0
0
May 11, 2006
#4
  • May 11, 2006
  • #4
stroked8e5 said:
Sorry if i'm misunderstanding this "I put the roller lifters in, put the dogbones into the spider, Up facing up, and set it down, bolted it and it looks good". The dogbones don't get put into the spider. Lifters all go in,then all the dogbones get set onto the lifters with nipples up and then the spider gets bolted down with each "leg" of the spider pushing down on top of the dogbones. Hope that made sense.
Click to expand...

+1

Yup, it sounds like he is trying to attach them somehow with his description. They just lay down under like stroked8e5 said.
 
M

mikemustang289

Member
Jan 12, 2006
224
0
16
mesa, az
May 11, 2006
#5
  • May 11, 2006
  • #5
I had the dogbones in between where the spider web curves around. I took them out and set them in between the lifters first then set the spider web down on top the way it's supposed to be. Thanks again for pointing that out, I can only imagine how much damage and trouble I would have gone through had I left it the other way.
 
You must log in or register to reply here.

Similar threads

6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
Engine 302 production block selection
  • FastDriver
  • May 19, 2024
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
48
Views
8K
Fox 5.0 Mustang Tech Jul 1, 2025
FastDriver
Progress Thread H/C Swap Problems/Ideas
  • sav22rem22
  • Mar 31, 2024
  • Fox 5.0 Mustang Tech
Replies
10
Views
2K
Fox 5.0 Mustang Tech Sep 10, 2024
AeroCoupe
Specific Cam Questions that Google can't seem to answer...
  • ChillPhatCat
  • Jun 20, 2024
  • 2.3L (N/A & Turbo) Tech
Replies
3
Views
903
2.3L (N/A & Turbo) Tech Jun 22, 2024
ChillPhatCat
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
4K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?