My car hit a curb about a year and I've been having some vibration issues ever since not to mention I couldn't get the camber set perfect on one side so it was suggested I replace the spindle / wheel bearings as I may have bent the spindle a little bit.
I went ahead and bought a new spindle and wheel hub. The new spindle is on the car. My question has to do with the wheel hub. Do I need to grease the inside of the hub where it slides onto the spindle (the bearing races I guess) and the shaft of the spindle? Or do I just take it right out of the box as is from ford and slide it onto the spindle and bolt up the brakes?
I appreciate the help so I don't toast a brand new hub / spindle as I paid around $230-240 for all the parts
I went ahead and bought a new spindle and wheel hub. The new spindle is on the car. My question has to do with the wheel hub. Do I need to grease the inside of the hub where it slides onto the spindle (the bearing races I guess) and the shaft of the spindle? Or do I just take it right out of the box as is from ford and slide it onto the spindle and bolt up the brakes?
I appreciate the help so I don't toast a brand new hub / spindle as I paid around $230-240 for all the parts