here you go, this is the best spintech prostreet clip out of them all, its an F303 cam, offroad X, i believe a powerdyne blower, 3" system dumped, 92 LX vert :
i have stock headers, offroad h and these dumped before the axle. and it really depends on what kind of sound your after. they're definately loud, but i think they kind of sound like a john deer tractor at low rpm. but OMFG they sound incedable at full throttle, especially after about 4k.
I don't like the sound of Spintechs anymore at all. They sound like a junk truck at idle, and I don't care for the sound up top either. My buddy now has mac on his car, and I love the sound of it. 100 times better imo. Here's a comparison, same exact setup, only the mufflers and tails changed. http://videos.streetfire.net/search/mac+mustang/2/99bf3481-8c6e-45c7-8626-c6232e62d372.htm
sounds good. Mine is loud already with the flows, but they are rusted and the flowtubes are in bad shape so im puttin on some fresh pro streets to wake up the neighbors
I don't like the sound of Spintechs anymore at all. They sound like a junk truck at idle, and I don't care for the sound up top either. My buddy now has mac on his car, and I love the sound of it. 100 times better imo. Here's a comparison, same exact setup, only the mufflers and tails changed. http://videos.streetfire.net/search/mac+mustang/2/99bf3481-8c6e-45c7-8626-c6232e62d372.htm
I have BBK shorties, Dr,Gas X and Spintech Prostreets out the tailpipes. All I can say is the sound is It turns heads. You will not be dissapointed! Ever since I changed mine I don't even listen to the radio and find myself wanting to drive in a lower gear... Just. my .02